ZMANALEX
-
Posts
14,760 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
VLSD is not standard on JDM cars. If it has the coolant fins on the diff pumpkin then is has the VLSD Alex
-
You guys do not know what cold is We have only had circa -4 this year and it feels like spring. Last winter we had circa -12 and it got a bit chilly but we only pulled on an extra jumper and got on with it Alex.
-
I am afraid that unfortunately they do charge you duty and VAT on the shipping charge. Also remember that your local shipping agent will also charge you a handling charge. Alex.
-
HELP NEEDED Replacing a wheel bearing - DIY job?
ZMANALEX replied to -Chris-'s topic in 350Z Technical
-
As what he says A bit quiet and it is really for girls. Quality system though. Alex
-
Hi and to the forum
-
Hi and to the forum Looks like an unmolested fine car that you have got there Alex.
-
You require a new fuse link unit mate. I have preowned ones in stock and good to go same/next day. Drop me a PM if I can help you further. Alex.
-
Correct on both counts Dave
-
There should be a small white label on the box clearly showing the CD09 code Sometimes it is stamped on the box casting. Alex
-
It is a DE box that you require for your S15 conversion mate as the HR box has the concentric slave and is not suitable. I have both the HR boxes and the DE boxes in stock. However, what you are after is the later DE box which will be a CD09. Unfortunately, I do not have a VQ35DE CD09 box in stock at the moment. Alex.
-
Hi and to the forum
-
HELP NEEDED Replacing a wheel bearing - DIY job?
ZMANALEX replied to -Chris-'s topic in 350Z Technical
No bearing puller or shallow socket required mate. Wheel off. Caliper bolts out and swing caliper to side and support. Rotor off. Hub bolts partially off. Dislodge tight hub by tapping on bolt heads. Remove hub bolts Remove hub. Make sure all faces are clean for assembly, especially the inside face of the rotor. Alex -
The oil light is coming on because you will be low on engine oil. A set of pads should fix at least one of your other issues. Alex.
-
HELP NEEDED Replacing a wheel bearing - DIY job?
ZMANALEX replied to -Chris-'s topic in 350Z Technical
No press required Chris as you are replacing the complete hub. It is a DIY providing you are handy with the tools. The old hub can be a bit tight in the upright but otherwise straight forward. Alex. -
Hi and to the forum Adam
-
In stock and good to go same/next day There are two types/sizes available for the 350Z. Facelift and pre facelift. Alex.
-
Plenty in stock but a bit more expensive than £300.00.
-
Hi and to the forum.
-
Hi and welcome to the forum
-
Hi mate, I think that CS does EBC pads for you application, failing that then Apec also manufacture a budget brand for JDM Both the above are budget brands, however they will do a job if you are stuck. Alex.