ZMANALEX

May be an issue with the overflow/breather system. Or may be one of the 2 seals at the top of the tank where the pump/sender units are fitted. These will only leak when the tank is full. These seals must never be reused and new seals must be fitted every time that they are disturbed. Access is from behind the seats so no need to drop the tank again. I have them in stock if required Alex

There should be no play on the rear sway bar bushes. Easy swop out and only £8.00 each. Best to remove the rear shock for a bench test, again very easy to remove, 1 bolt at the bottom and 2 nuts at the top. New rear shocks in stock Preowned rear shocks in stock New rear sway bar bushes in stock New rear sway bar drop links in stock. Alex

Thanks for the referral guys PM received and replied to Annie Alex

Perhaps you have decats fitted or test pipes. I have for sale preowned oem cats for VQ35DE and the HR models. I also have all the gaskets that you may require for the install. Sorry but I have none that I can loan you mate. Alex

Paul, I have genuine Nissan replacement mirror glasses in stock mate. They simply click into place Alex

Hi and to the forum Annie

Glad that you are all sorted Darren and that your Z is all quiet again Alex

Doubt if you will get it to move unless you have really been supping the porridge. Alex

How much for a set of 25s for the rear sir? Hoy You

Brembo and DBA Rotors (discs) in stock: Brembo and Ferodo Pads in stock: Drop me a PM if I can help you further Niko viewtopic.php?f=157&t=58518 viewtopic.php?f=157&t=50717 viewtopic.php?f=157&t=55106 viewtopic.php?f=157&t=55107 viewtopic.php?f=157&t=27438 All the above stuff and much more can be found in my 9 page sub-forum: viewforum.php?f=157 All in stock and good to go same/next day Alex

Eibach hubcentric spacers in stock and good to go same/next day viewtopic.php?f=157&t=42415 Alex

Thanks for the referrals guys PM received and replied to Dan Alex

Eibach sway bars are are great upgrade, however the sways and links will really have little effect on low speed straights. Same with compression rods even if the ball joint or bush is worn, unless the bush has fallen out which would also give you a loud knock on uneven surfaces. First thing that I would be looking at is your tyres mate, however I am struggling to see how you can have the issues that you have described whilst travelling in a straight line at 30 mph.

Cood bee yoor powr steern fluid loe or tire presur loe

They tried this a few years back and it never caught on as most, including myself found that the cambers were all "wrong" and there was insufficient run off areas where it mattered which did not inspire confidence, however thay have now addressed the run off issues with some major work having taken place during the close season. Cambers remain the same. The KRC reverse circuit is extremely demanding and expect your lap times to be down by circa 6 secs. Alex

When the oil light comes on it is to late I am afraid. Alex

OEM airbox with Cosworth or HKS Performnace panel filters Alex

HKS and Cosworth in stock and good to go same/next day:#1: Check out my sub forum viewforum.php?f=157 Alex

Coincidence, nothing to do with exhaust. As Dan has said get some proper oil in it NOW. Alex

Nismo style N1 rear wings in stock Good quality and great fit Alex

Rear LED lights available here viewtopic.php?f=157&t=13464

Chris, I would wrap all exhaust stuff that is close to the clutch lines and tube. I would also wrap the clutch lines and hose. I would also recommend that you swop out the concentric tube as well as the concentric slave. viewtopic.php?f=157&t=57096 viewtopic.php?f=157&t=57094 Both these parts are in stock and good to go same/next day mate Alex

It is T3 that you have Sam You can purchase a decent hand held laser temperature tool for circa £50.00

Pm received and replied to Amy: Thanks for the referrals guys

I monitor mine on the Z but not the 35. Alex