Jump to content

ZMANALEX

Members
  • Posts

    14,789
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. Thanks Jay: PM received and replied to. Alex.
  2. Thanks guys: Plenty in stock and good to go same/next day. Alex.
  3. ZMANALEX

    Toyo T1R

    These also work well however no 45 profile available at the moment: http://www.toyo.co.uk/tire/pattern/proxes-r1r Alex.
  4. ZMANALEX

    Toyo T1R

    T1 Sport: I think. Alex
  5. ZMANALEX

    Toyo T1R

    Jay, I ran T1Rs on the 350 when they still made them in 18" sizes and had no complaints. And always used them in the wet at Knockhill. Remember that they are phasing out T1Rs so you may have a problem getting matching tyres in the future. Alex.
  6. I sell both the Hel and Goodridge and even though Goodridge are expensive they are a far superior product. I run Goodridge braided on both my 350 and GTR R-35. Same old adage "you get what you pay for" Alex
  7. Stick your old OEM cats back on for the test or take it to an MOT station that is not so picky. Alex.
  8. Your sand blaster would probably blow holes in it Chris: :lol:
  9. Welcome to the forum: A roll bar or roll cage for the 370 Roadster would have to be fabricated. I have a template for the 350 and 370 Roadsters so I can fabricate this for you without having the car physical. Let me know if I can help you further. Alex.
  10. Looking good Stu. Just caught up on this thread and for any one else who hits the same problem. The captive nuts can be reached by removing the side boot trim. The nut nearest the rear is exposed and be reached with a 10mm spanner or socket. The middle nut and the nut nearest the front can be reached by drilling a 13mm hole through the outer skin to allow a 10mm socket through. Alex.
  11. Keep up Irfan, this is another one: Alex
  12. Afraid not mate, however the Skyline G35 has the rear seats. But if you are not on a budget then my R35 will be up for sale next week. 4 seats, big boot and plenty torque and power. I think that you will like it. Alex.
  13. Nice one guys: Ferodo DS 2500 is probably the most cost affective upgrade at £85.00. However genuine Brembo after market pads are only £36,95. Both in stock and good to go same next day. Alex.
  14. I can help you out with a Kuro swop but you will have to cover shipping costs both ways. Regards, Alex.
  15. I use both with no issues. However if I recall correctly the Innovate is much cheaper. Alex
  16. PMs received and all replied to. Alex.
  17. Rear Eibach 30mm drop springs for 350Z Roadster are in stock and good to go same/next day. Drop me a PM if I can help you further. Alex.
  18. (1) Clutch (2) Exhaust (3) Traction Control Remedies: (1) New clutch kit and flywheel: £620.00 (2) Weld: £50.00: Replace £400.00 - £850.00 (3) Go easier on the loud pedal. Just drop me a pm if you require any parts shipped out. All in stock and good to go same/next day. Alex.
  19. Rust free oil feed pipes in stock as well.
  20. They do tend to corrode a bit but they are not expensive and very easy to replace. Preowned in stock and good to go same next day at £30.00 each. Also there is not a gasket between the sump pan and mid sump. Alex.
  21. There should be a nut on there, however I would not worry about it as the other 3 bolts will keep the strut bar in place and they will not break on removal. Alex.
  22. Unfortunately you will require to step up to DBA or similar for confident trouble free track driving. Also pads, lines and fluids will be required. http://vimeo.com/24192150 Alex
  23. Motul Eco Nergy 8100 5W30 in stock and good to go same day. Can be bought individually or as an engine service kit: http://www.350z-uk.com/topic/66420-350z-engine-oil-service-kit-4695/ Alex.
  24. I have all the headlamp washer stuff in stock and good to go same/next day. Just drop me a PM when you know exactly what you require and the year and model of your 350. Alex.
  25. Here you go: http://www.350z-uk.com/topic/63721-exedy-clutch-kits-27500-ultra-light-flys-34500/ These will fit the facelift 350Z. In stock and good to go same/next day. Alex.
×
×
  • Create New...