ZMANALEX

P2410 and P2420 is what i stock, sell and fit with no issues

Fitted loads of the Tein rack ends and rod ends with no issues with geometry or full lock Best to go back to your supplier and test there after sale service. Regards, Alex.

Motul 8100 Eco-nergy is what I stock and has proven to be extremely popular mate. Plenty in stock. http://www.350z-uk.com/topic/66420-350z-engine-oil-service-kit-4695/ Can be bought on own or as a service pack: Alex.

I have one Andrew and I am in Perth which is loacted in the North East of Scotland: :lol: We can hook up like we did when you collected the rear LEDs if you are still working in the area. Alex.

These are cheap Chinese copies and the bushes are made of plasticine and the ball joints are made of chocolate. I also doubt if the casting would be up to much. However you pay your money and take your chance, but you know what they say if it is to cheap it usually is. Alex.

Wrapping the cats with the heatshieds off would certainly reduce the heat transfer, however i would be a bit concerned that the cats would lose the air cooling and may run a bit hot. You can all but try it as you can always remove the heat wrap if you do have any issues, just keep 999 on fast dial. :lol: If you wish to stay with OEM cats with heatshields, I have a few decent preowned sets in stock. Alex.

Just remove the heat shields from the cats to stop them rattling, however they are there for a reason. There is also a heat shield on each exhaust manifold which can be removed in situ, but again it is there for a reason. In reply to your final question, the exhaust manifolds can be removed insitu but expect at least 8 hours out your life and many skinned knuckles. Alex.

I have a complete preowned 370 exhaust and Y section in stock which has hardly seen any miles. It looks like it may even have been removed before the car left the showroom. Just drop me a PM if I can help you further Matt. Alex.

Thank you IMC. If you mean the W shape bracket then I have new and preowned in stock. Just drop me a pm if I can help you further. Alex.

You need to be more specific: Is it toe or camber as they are different lengths? You will also require nuts and cam washers. All in stock if required. Alex.

It comes as one piece with all the brackets Adam, Alex.

Have you checked for excess movement of the rear hub? All hub parts including bushes, arms and bearings are in stock and good to go same/next day if required. Good luck with your diagnoses. Alex.

There is no reset required for replacement of the self leveling device. I have these in stock (preowned) and good to go same/next day if required. Just drop me a PM if you require one. Alex.

Still £280.00. Genuine Nissan: Totally plug and play. 6 x pairs in stock and good to go same/next day. Alex

New bumper and wing required. If using genuine Nissan parts the cost of parts and paint and material will be circa: £700.00 Labour for panel and paint will be circa: £550.00 So £1250.00 + vat = £1500.00. As it was not your fault, why settle for second hand or after market poor fitting panels. Guess that it will be an insurance job. Alex

Sorry mate, I do not. Alex.

Edit: Sorry, never saw the link, only got genuine Nissan ones in stock mate. Alex.

In stock and good to go same/next day. Alex.

Received and replied to. Alex.

Plenty in stock but you would be cheaper at Nissan as I would have to charge shipping mate. Alex.

Brembo pads are great value at £70.00. They are not suitable for track however they will serve you well for normal or spirited road use. You will also require the Brembo noise reduction anti squeal shims for these pads. Brembo pads and Brembo noise reduction anti squeal shims are in stock and good to go same/next day. Just drop me a PM if I can help further. Alex.

Thank you guys: Preowned Xenon headlamps are in stock and good to go same/next day. 6 pin or 8 pin fitment and all for RHD cars. Alex.

Black leather preowned seats in stock. All electrics are working. Just drop me a PM if I can help further. Pallet shipping to Wales is not a problem. Alex.

In stock and good to go same/next day: Just drop me a PM if I can help further. Alex.

Slotting another section of hose inside the air filter will not work. Why don't you just remove the rubber section from the filter in your picture and just run 1 tube? Or am I missing something here? Alex.