Chris`I

she sounds high maintenance Sounds like Louis to me

And now they hide them in the headlining

Looks like it was search engine bots/spiders

I had a similar convo with my +1. Mainly her asking when I was getting a 370z, telling me I had to get one and why havent I ordered it Dont worry Mitch, you wont be single long if half the single men on here have anything to do with it

Not quite the same, will get the powers that be to look into it

Yup All I was getting at is that ram air isnt very effective at the best of times, so any claim to be semi ram air will make faff all difference unless you are doing 200MPH+

You still get one for more than 350 posts, just need to PM M13KYF to claim it

Wouldnt imagine it would die, most (if not all) throttle back on overheating these days, its just more the fact it will add more heat to the surrounding components which wont be as good with dealing with it and might kill them earlier

Its already gone

Can appreciate that, and while the actual content of the site on load doesnt look too risque, the adverts on there are a bit too much

Now now chaps, keep it on track please, family forum and all

Good work bud. PM'd you the link to the dash file. Only thing I'd watch are the core temps as you've OC'd it. 1.6 Dual core should run everything easily at stock speed. Velcro is also fine, I have mine secured in the letterbox cubby between the rear speakers with velcro. If you get the chunky stuff, its really strong, stronger that the glue on the back to stick it down Careful you dont use too much as it seriously is stronger than the glue on the back!

Get down to the post office and see what they say. Legally, if someone at the address signs for it, they will class it as being delivered and their end of the deal is done. Whats the buyers feedback like? If its crap can you not pull out and relist it?

Well good luck getting any ram effect out of it. While I agree there could be a slight pressure increase at speed, its not a proper ram air intake. When sportsbikes started using them, they were proven to be pretty minimal and that was on high revving engines that had the air traveling straight into the intake and through a filter into the engine, with minimal amounts of bends. Our intakes have far to many bends for ram air to be effective.

Yup be careful of the cameras, they have quite a few of them around Japfest. A few years ago I went in convoy and they were pushing on a bit too hard so I slowed and dropped off the back of the line. Needless to say a few miles down the road was a camera. Hope none of them got caught

Don't like his skanks in the last pic either... More than enough to make me vote for Ian

The stock airbox/intake is nothing like a ram air intake. Yes it is a cold air intake as it takes air from outside the engine bay, but its not ram air

No need to cut the grille. If you have a UK car (not sure if its the same for JDM), there is a removable plate on the air box side of the lower grille. Remove this and you can afix an intake tube to where that was fixed. Job done. I did this temporarily with my pop charger and it lowered the IATs by maybe a degree, but help heatsoak a lot by dropping the temps quickly from a standstill.

Make sure you bleed them in the right order and don't let the resevoir run dry! Once you get air in it's a sod to get out. And make sure you check the runout, might need to get the discs scimmed if it's too much.

TGM? Other members have used and highly recommended them +1 I can vouch for their work quality and wish I lived that close On the other hand TGM are probably glad I don't as I would be forever noseing around +2 - get it down to Tom and the gang, they will know more than your local Nissan dealer about 350z, they service enough of them from here now!

Aye, user name is Sarnie! Shhh, they're not meant to know Stew

The team fancied a break

Tis a repost, but not one I've seen for quite a while!

Incuding the pressure washer and foam lance?

Sure there will be a bit of both, espcially from Ian