veeg33

Took my zed to a dyno day 2 years ago and found that there are little to negligible difference between expensive panel filter to cheap ones. The guy at the dyno kindly did 3 runs. 1st run with used Blueprint panel filter (less than £10 and about 3000 miles or less), 2nd run with brand new HKS hybrid panel filter (around £35), 3rd run without filter (in controlled condition hence minimum concern with foreign object). Turns out, there are only about 2-3bhp between them. Blueprint was the least BHP, without filter was the best. So in terms of performance, there are not difference but i suspect HKS will have better filtration but less restrictions compared to Blueprint. Changing to other intakes will only benefit from nice intake sound when you put your foot down....and some disadvantage in BHP but i doubt you can really feel it as you are too busy enjoying the intake sound =)

Hello and welcome

Hello and welcome

Hello and welcome Sent from my EVA-L09 using Tapatalk

Hello and welcome Sent from my EVA-L09 using Tapatalk

The OEM ones can be a bit small for shopping bags. Try alternative ones, pics here -> http://www.350z-uk.com/topic/89200-boot-cargo-net/ Or try this from Fleabay --> http://www.ebay.co.uk/itm/50-x-80cm-Large-Caogo-Net-Luggage-Nylon-Elastic-Mesh-Net-Universal/361925250036?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D2220071%26algo%3DSIC.MBE%26ao%3D2%26asc%3D20140122125356%26meid%3Da5f936adc16343c8a8f08154d49d9c28%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D282112165732 This is about 5cm bigger than mine.....should be OK for shopping bags......this is from HongKong, hence expect up to 1 month in delivery....£6.36 worth a try

awwwww....... Happy Birthday!!!!

I got mine 6000k D2R from ebay few years back, i think they are around £20 ish for both. Been fine for the past 2 years.

Should be doable, info here --> http://www.350z-uk.c...rice-reduction/ However not sure about UK DE vs JDM DE, in terms of being able to switch it on/off. Check with Mark@Abbey

Hello and welcome

or Jon@Emperor, they'll sort you out

Good news the currency is still there at your old address...........Have a good holiday.........Sa Wa Dee Cup!!!

Hello and welcome

Hi Greg, you have a PM =)

Good luck with the sale Stu!! Surely someone will buy this from you at £7k, this is an absolute bargain with all the mods and care given to this zed.

Hello and welcome

Hello and welcome

If you are going down the re-spray route, i know 2 places in Hudds that do that for around £200 or less. One's behind Charlie Brown on Manchester Road, one's behind the demolished Sports Centre. Edit: Just remembered that the guy quoted me £130 for full front bumper about 2 years ago.

Rather than using butter knife as suggested in the link given, use these --> http://www.ebay.co.uk/itm/UK-5-Piece-GM-Car-Door-Plastic-Trim-Panel-Dash-Installation-Removal-Pry-Tool-Kit-/222413756764?hash=item33c8e4995c:g:o-UAAOSwfVpYqC24 I got a set and they are really handy and never left a mark on my zed.

Hello and welcome

He will have some (if not plenty) pre owned in fully working condition for sale. Alternatively, have you disassemble the motor housing and give it a good clean with contact cleaner? Mine stopped working about 2 months ago. And it came back to live after a good clean Guide here --> http://my350z.com/fo...ndow-motor.html

If you know the spec of the bolt - Size, thread, length, etc.......I'm sure your local nut&bolt supplier stock them. Or even Ebay will have them.

or Jon@Emporor

I'm sure he has some new and pre-owned ones for sale

hello and welcome