GMballistic

Looks fantastic. Great job.

Link; http://www.350z-uk.com/forum/137-zmanalex/

Another vote here for Horsham Developments.

They are! 225 front and 245 rear. That's a staggered set up Kyle. We're taking about wheels here, not tyres Maybe so but they are still a staggered set up. Front Size: 18 x 8.0 Offset: + 30 mm Weight: 18.19 lbs Tyre: 225/45/18 Rear Size: 18x8.5 Offset: + 33 mm Weight: 18.62 lbs Tyre: 245/45/18 Rears are wider alloys so a staggered set up matey.

Exactly right. Get all the mods like above done first and then get it all mapped to run correctly.

Welcome aboard Simon.

They are! 225 front and 245 rear. That's a staggered set up Kyle.

Depends if you go to Nissan dealers or not?!

Looks fantastic Djuzi. Love the colour choice and all that carbon just finishes it off lovely.

Try Alex on here; http://www.350z-uk.com/forum/137-zmanalex/

Sneaky American idea by the developers of Up-Rev remapping software, the software can be bought by anyone either private or professional, but each map thats created via the software has to have a license, which means that the developers get revenue for each map done, IE one map + one license fee......wish i had thought of it. Can't you remap 3 times with the same license? Yes ~ you only pay for the license once. From Horsham Developments;

Do you notice much difference Yes I noticed a difference ~ the car is quicker off the mark in the first few gears which is where I found it most noticeable. The main thing is though that you know the car will be running correctly on any performance mods you've done. With basic mods like air induction, exhaust and a plenum spacer it's not suddenly going to turn your Zed into a drag strip monster but it will definitely get everything running as it should, give you a more linear torque curve and of course take off the 155mph top speed limiter. From Horsham Developments (where I had mine done.) http://www.h-dev.co.uk/index2.php?page=350z_mapping

Happy Birthday.

Mishimoto also do a nice one as well. Link; http://www.mishimoto.co.uk/rear-mount-thermostatic-sandwich-plate.html

Have a look at my thread here when you get a chance. Might help you out a bit. Link: http://www.350z-uk.com/topic/84321-what-a-difference-a-snow-foam-gun-can-make/

Exactly.

Naah. I think it's more like when you where a child and your parents would say to you; "it's your Birthday next month", ..."it's your Birthday next week", ..."it's your Birthday tomorrow". Just to get you nice and excited.

Stubby aerial would look good next. Link; http://www.350z-uk.com/topic/62006-350z-honda-rdx-stubby-massive-saving-13-delivered-huge-stock/

^^ Looks great Andy.

^^ Good heads up Sam.

Think that's a rear alloy going from the size Harry. Welcome aboard cornerstone0010. Maybe try a few breakers on eBay to see if they can help get you a reasonably priced alloy. There are a few 370Z's being broken up so worth a message to the sellers I'd bet. Link: http://www.ebay.co.uk/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xbreaking+370z&_nkw=breaking+370z&_sacat=0&_from=R40

Planning to get the Cobra HFCs instead, I know they are more expensive and I have heard there are problem with berks HFCs on the MoT. Is this true ? Not true imo. My car has an Invidia Gemini exhaust system with Berks HFC's and it flew through the MOT with no problem in May this year. It wasn't even close on failing the emissions test so I wouldn't worry. I did take it for a drive to warm it up first but by the time it had the emissions test it was a good 40-50 minutes later as I had to wait a bit before my MOT started so I doubt it made much of a difference to the results.

Can't deny it I'm jealous as I would love to do this one day. Definitely want to see the videos if you have any.

Doesn't look bad. Definitely interested in what it sounds like.

Cool.