RobPhoboS

I've been using EBC's for the last few years, zero issues. A few guys using them on their GT3's as well (for track use), once again, no issues. Is that a bad experience you had or just hearsay ?

Awesome stuff. Keep posting

From looking at the videos this is a handy little device. It's on my shopping list now, just have to work out where to have it installed.

Ah cool,I was wondering if that may happen

It doesn't. I presume you enter some data in, like tank size and so on. Check out some videos on youtube.

This? http://www.amazon.co.uk/ScanGauge-II-Fuel-Computer-XGauge/dp/B000AAMY86

I'll be in touch ! There's a chance I could be in Surrey visiting family though (as the last few times I was there, I was under the car tinkering away )

I wanted to do the fix as well, since I can only get around 48ltrs in there, around 250ish miles between fill ups. Obviously the sensors need cleaning or the sender thing replacing. Brad - how hard was it to do ?

The Ultra Racing stuff will fit, I'd get it from a trader here or driftworks if you DID have an issue. (I don't think you will) If you search a chap called 'addisj' has some UR bracing on his car. Do a search like this on google: site:350z-uk.com ultra racing

Ultra racing make replacements if you want new, and it's possibly an improvement but hard to say.

Nice ! I couple of friends get their 918's pretty imminently this year, I can't wait to get my arse in them as experience that kind of power

Yeah I'm settled on it... There's only 5% doubt in my mind Balloon looks cleaner and crisper, and that 5% is decreasing all the time With regards to my Zworks lights, we both agreed the paint shop haven't matched Silverstone grey very well, it's too dark... I don't want the projector to disappear into the black housing. They are going to repaint them asap. I still like the Balloon White though but I really think you can't go wrong with either colour.

Search (banana or compression) and you'll see examples of what it's like - if it's just the rubber bush, replace that - not the whole arm.

Actually get some masking tape and a marker pen, label each bolt And ensure you have the right tools. Also worth checking out this video as he takes the plenum off/pops back on:

Yeah I think it's fairly unanimous for the Bianco Fuji. Do it!

Going to get one next month I think, my one has started wobbling a bit I must have jinxed it as my battery suddenly died last week

Find someone to help out from the club, where do you live ?

(not sure if I'm reading what you mean't correctly) Yes but that manual tells you how to remove it and put it back on PROPERLY and torqued properly (need to do it right imho), download it. I'm using VHT black wrinkle spray paint Pritchard

http://www.350z-uk.com/topic/37794-plenum-spacer-mrev2-manifold-installation/

VERY hard to tell the difference in that last photo. As mentioned before, a mate had his Gallardo spyder in balloon white, looked great but also last year another chap joined us in his Bianco Fuji F12, once again, looked THE balls

Sweet. I'll order a set for myself.

Bumping up for Tarmac - or anyone else that has installed these

In regards to the ECU: http://www.350z-uk.com/topic/92887-before-before-after-dynos-abbey/page__st__40#entry1399098

I hope he's written which is which Bottom left looks good to me, Balloon White it seems.

Have you had a chance to get it on the scales yet ? Some brake pad ideas... (hear good things about Project Mu when I was looking around) Carbotech (specifically XP8/XP10/XP12 iirc) Endless Personally I like to use EBC, I think their Orange stuff pad is the race/trackday version but I've no idea how they perform. (I want to try out Carbotech at some point) Useful: http://my350z.com/forum/autocross-road/214117-track-pads-database.html