Wookiee22
-
Posts
589 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Wookiee22
-
Any thoughts anyone?
-
Did you put these on eBay eventually?
-
Or perhaps a budding sniper?
-
Looking to order my oil cooler this afternoon. Do the sandwich plate connections need to be 90 degree or will straight ones do the job?
-
I'd steer clear of the chrome ones.
-
The UpRev remap also allows 100% throttle opening.
-
Nice job! I think I see what he's done there. The microswitch makes a lot of sense - saves having to connect anything to the locking system electrically.
-
Hmm. Good luck with that!
-
Think a lot would depend on patience and depth of pockets!
-
I'd go with spacers as well. Very easy mod - about 30 mins work tops.
-
-
Liking the dial layout Dave! Any update on the tuning?
-
I'd agree, but only when there is actually a change to the lane layout. A load of cones down the side of the road and no workers to be seen hardly constitutes roadworks IMHO. Therefore the speed restrictions then seem unwarranted.
-
I had my bung welded on my hfc, just ater the flange that connects to the headers. The trick (as it turns out!) is to get it at the right angle, so that it doesn't interfere with any of the bolts and gives you sufficient clearance to get the probe in place.
-
Are you not tempted to return it and request one that fits? Strikes me as a fairly drastic measure to have to take on a new bit of kit!
-
Don't imagine you'd lose much, if any. Which system are you looking at?
-
This may help mate: http://www.my350z.com/forum/wheels-and-tires/263033-nismo-60mm-extended-wheel-studs.html
-
Just to clarify, do you mean the ones without the bolts already attached to the spacer?
-
-
-
As for the GT / Non - GT, it may affect resale slightly but if you're holding on to it for a while that shouldn't matter. The only thing I think you're really missing out on is cruise control (which I'll admit would be a nice-to-have) - the leather seats and Bose stereo are of questionable quality IMHO.
-
If you don't have a set of crow's feet (or know someone who you can borrow some from) they're a handy bit of kit to add to your tool collection. Lots of hard-to-reach bolts on the zed (cats, headers etc) and these make the job easier!
-
Have been through all 30 pages and not one person has done what i'm doing Most of them have kept it safe where only a few have gone outside the box.... I have taken the box and kicked it the f$ck out of town Keen to see the results!
-
PM sent
-
Thanks for the pointer. Guess I'd better look into it further!