johnny cobra Posted August 25, 2014 Posted August 25, 2014 Fitted my front reflector LEDs plus wiring kit with delays and flashing when locking and unlocking . Looks brilliant if I do say so ...... JC 1 Quote
pjf1985 Posted August 25, 2014 Posted August 25, 2014 Fitted my front reflector LEDs plus wiring kit with delays and flashing when locking and unlocking . Looks brilliant if I do say so ...... JC Any pics mate? Sounds good! Quote
Animala Posted August 25, 2014 Posted August 25, 2014 Recently, fitted ZunSport black grill. Fitted black door handles, tinted side repeaters black. Waiting to fit my Cobra Sport exhaust this week hopefully. Sent from my iPhone using Tapatalk Getting mine next week! 1 Quote
pjf1985 Posted August 27, 2014 Posted August 27, 2014 Meant to add this last night but forgot so was yesterday but ah well lol. Firstly I wrapped my rear strut bar cover in gloss black as it was scratched up. Then I also done the flip key mod. Very pleased with the outcome! Should have came with a flip key all along! 1 Quote
Animala Posted August 27, 2014 Posted August 27, 2014 Meant to add this last night but forgot so was yesterday but ah well lol. Firstly I wrapped my rear strut bar cover in gloss black as it was scratched up. Then I also done the flip key mod. Very pleased with the outcome! Should have came with a flip key all along! Are these tricky to do at all? As in does someone on here supply the whole key & then a regular Nissan dealer can programme them? Out of all the stuff I want done to my car this is the one this is the one thing I actually want & need! 1 Quote
pjf1985 Posted August 27, 2014 Posted August 27, 2014 (edited) Meant to add this last night but forgot so was yesterday but ah well lol. Firstly I wrapped my rear strut bar cover in gloss black as it was scratched up. Then I also done the flip key mod. Very pleased with the outcome! Should have came with a flip key all along! Are these tricky to do at all? As in does someone on here supply the whole key & then a regular Nissan dealer can programme them? Out of all the stuff I want done to my car this is the one this is the one thing I actually want & need! The flip key is an easy mod to do and looks awesome! No programming needed as you just swap the internals over from your existing remote key. I got this key from ebay: http://www.ebay.co.uk/itm/321067673609 Then got this Nissan emblem to finish it off: http://www.ebay.co.uk/itm/281350182704 Then all you need to do is get the new key blade cut at your local key cutters. Then take the chip and the little transponder out your original key and transfer into the new one. The chip fits neatly inside (without the rubber housing). Then the transponder you just put inside with some blutac to keep it secure. That's pretty much it! Let me know if you need any more help, Edited August 27, 2014 by pjf1985 4 Quote
Ballardpaul Posted August 27, 2014 Posted August 27, 2014 Thanks for this. I've just ordered a set. 1 Quote
Animala Posted August 27, 2014 Posted August 27, 2014 Meant to add this last night but forgot so was yesterday but ah well lol. Firstly I wrapped my rear strut bar cover in gloss black as it was scratched up. Then I also done the flip key mod. Very pleased with the outcome! Should have came with a flip key all along! Are these tricky to do at all? As in does someone on here supply the whole key & then a regular Nissan dealer can programme them? Out of all the stuff I want done to my car this is the one this is the one thing I actually want & need! The flip key is an easy mod to do and looks awesome! No programming needed as you just swap the internals over from your existing remote key. I got this key from ebay: http://www.ebay.co.uk/itm/321067673609 Then got this Nissan emblem to finish it off: http://www.ebay.co.uk/itm/281350182704 Then all you need to do is get the new key blade cut at your local key cutters. Then take the chip and the little transponder out your original key and transfer into the new one. The chip fits neatly inside (without the rubber housing). Then the transponder you just put inside with some blutac to keep it secure. That's pretty much it! Let me know if you need any more help, Thanks, think I'll order a new key first from Nissan & then do this to my old key (which would effectively make it new except for the innards) because I only have the one at the moment & if I **** it up I'll be in trouble 1 Quote
pjf1985 Posted August 28, 2014 Posted August 28, 2014 Thanks, think I'll order a new key first from Nissan & then do this to my old key (which would effectively make it new except for the innards) because I only have the one at the moment & if I **** it up I'll be in trouble You should be fine mate, not much to **** up lol. I've only got one remote key and the basic master key. Quote
Rocky4510 Posted August 28, 2014 Posted August 28, 2014 Meant to add this last night but forgot so was yesterday but ah well lol. Firstly I wrapped my rear strut bar cover in gloss black as it was scratched up. Then I also done the flip key mod. Very pleased with the outcome! Should have came with a flip key all along! Are these tricky to do at all? As in does someone on here supply the whole key & then a regular Nissan dealer can programme them? Out of all the stuff I want done to my car this is the one this is the one thing I actually want & need! The flip key is an easy mod to do and looks awesome! No programming needed as you just swap the internals over from your existing remote key. I got this key from ebay: http://www.ebay.co.uk/itm/321067673609 Then got this Nissan emblem to finish it off: http://www.ebay.co.uk/itm/281350182704 Then all you need to do is get the new key blade cut at your local key cutters. Then take the chip and the little transponder out your original key and transfer into the new one. The chip fits neatly inside (without the rubber housing). Then the transponder you just put inside with some blutac to keep it secure. That's pretty much it! Let me know if you need any more help, Awesome, didn't even know these existed, ordering mine now I can't stand the Nissan key! Sent from Tapatalk 1 Quote
StevoD Posted August 28, 2014 Posted August 28, 2014 (edited) /? Edited September 24, 2014 by StevoD 1 Quote
StevoD Posted August 30, 2014 Posted August 30, 2014 (edited) ? Edited September 24, 2014 by StevoD 2 Quote
pjf1985 Posted August 30, 2014 Posted August 30, 2014 Awesome Stevo!! Canards look sick, and the number plate holder looks very tidy! Quote
Stutopia Posted August 30, 2014 Posted August 30, 2014 They look super aggressive, nice. Have you considered colour coding them at all? Quote
jonw246 Posted August 30, 2014 Posted August 30, 2014 (edited) Only just found this thread Installed a few bits I had lying around from my previous car which just so happened to fit the zed the other day... 5000 kelvin temperature bulbs Cree 3w sidelights (hard to picture as in reality they're really bright, perfect colour match to my dipped beam) and also silvertec indicator bulbs Rays red dust caps (no current pictures sorry) When I received them for my Mazda.. Finally surface mount Amber led side repeater bulbs, suprisingly bright and give a nice led effect and instant flash on and off Sent from my HTC One using Tapatalk Edited August 30, 2014 by jonw246 1 Quote
ioneabee Posted September 1, 2014 Posted September 1, 2014 Well - started the task that has had me daunted since I bought the dash cams. Hard wiring the power magic !! Pulled the cover on the fuses to be confronted with the mini blade type - thinking that the wires from the PM would just not fit Also using a screw driver fuse tester was getting no power reading at all - tried earthing to a different bolt.............all good (newbie error one) Half an hour later all done and cables tidied away and 24/7 cams operting Quote
StevoD Posted September 3, 2014 Posted September 3, 2014 (edited) ? Edited September 24, 2014 by StevoD 1 Quote
Ceejay29 Posted September 6, 2014 Posted September 6, 2014 Long night at the garage finally overhauling the poor JDM set up. Test and clean tomorrow Quote
Animala Posted September 6, 2014 Posted September 6, 2014 Not today, but on Thursday fitted the Cobra exhaust Take some pics (& maybe some video) later on when I'm out of work. Quote
WhackyWill Posted September 6, 2014 Posted September 6, 2014 This week fitted front and rear spacers 20mm at the front and 25mm at the rear. Also fitted a Cobra rear box and a Custom made centre section. Sent from my iPhone using Tapatalk 3 Quote
Animala Posted September 6, 2014 Posted September 6, 2014 Like I said, this fitted. Hope that smokes calms down soon =P Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.