martybhoy Posted January 8, 2017 Posted January 8, 2017 Hey guys, Thought I'd share my test of the auto finesse iron out product in the off chance you were considering it. Sadly it's on the 350z replacement. Still gutted I'm no longer a Z owner. Quote
davey_83 Posted January 8, 2017 Posted January 8, 2017 Looks fab, tested on right mucky wheels would be more impressive though. 1 Quote
Andy_Muxlow Posted January 8, 2017 Posted January 8, 2017 Looks great buddy. I have been thinking about getting some. Were you happy with the results? Sent from my iPhone using Tapatalk 1 Quote
martybhoy Posted January 8, 2017 Author Posted January 8, 2017 Looks fab, tested on right mucky wheels would be more impressive though. I think the sharpness of the camera maybe didn't show the dirt and grime up as much. The wheel was moderately dirty with a lot of roadworks in my local area and around 250 miles use since the last wash. Looks great buddy. I have been thinking about getting some. Were you happy with the results? Sent from my iPhone using Tapatalk I was particularly impressed. Without the use of a wheel cleaner product or any agitation with a brush or soap to be rinsed off and leave the wheel in the condition it was, I thought was very good. I have content for another video with purely the wheel cleaner which I'll upload when I get a chance, I found using iron out, rinse and then wheel cleaner left the wheels extremely bright, clean and smooth to the touch. I'll post try and make time if people respond well to the videos. Cheers for the first feedback. 1 Quote
Stutopia Posted January 8, 2017 Posted January 8, 2017 Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? 1 Quote
martybhoy Posted January 8, 2017 Author Posted January 8, 2017 Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? Haha in all fairness this does smell pretty bad! Not used Revolt though so can't say which is better/worse. 1 Quote
ilogikal1 Posted January 8, 2017 Posted January 8, 2017 Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? Not according to the tests in my thread, no. Revolt is currently my go to and I'd be surprised if anything that's not Bilt Hamber beats it... should I ever get round to finishing that test 1 Quote
coldel Posted January 9, 2017 Posted January 9, 2017 I use BH Auto Wheel great stuff. Also smells. Sent from my iPhone using Tapatalk 1 Quote
ilogikal1 Posted January 9, 2017 Posted January 9, 2017 Auto Wheels isn't exactly a pleasant scent, that's true - you certainly wouldn't want to use it as an air freshener! But it's still a lot better than some. Quote
Stutopia Posted January 9, 2017 Posted January 9, 2017 Larry makes a wheel one which smells delicious - plum scented. It's also one of the more competitively priced in the range (ignoring international shipping and import duty and the collapse of sterling ) Quote
Olly350z Posted January 9, 2017 Posted January 9, 2017 Used one of the juicy range fallout removers from Steveo and was very impressed. But my god, why do these all smell like hells arsehole!? Quote
ilogikal1 Posted January 9, 2017 Posted January 9, 2017 But my god, why do these all smell like hells arsehole!? They're typically Oxalic/Thioglycolic acid based and utilises ammonia. 1 Quote
coldel Posted January 9, 2017 Posted January 9, 2017 And the guttering of the road outside the house looks like some sort of ritual sacrifice has just occured..! 2 Quote
Paul K Posted January 9, 2017 Posted January 9, 2017 I've been using Iron X, and much the same story....it stinks, and looks like I've opened an artery when washed off Quote
Ridz Posted January 9, 2017 Posted January 9, 2017 I use BH Auto Wheel great stuff. Also smells. Sent from my iPhone using Tapatalk +1 for Bilt Hamber Auto Wheel Quote
coldel Posted January 9, 2017 Posted January 9, 2017 If you order it on some ebay traders you get a cute little agitation brush and microfibre towel chucked in with it too. Quote
Paul_B Posted February 4, 2017 Posted February 4, 2017 I used Autosmart's Red7 it half the price of iron X plus doesn't smell as bad and I think it does a much better job. Quote
ilogikal1 Posted February 4, 2017 Posted February 4, 2017 iron X... and I think it does a much better job. That's not difficult, Iron X is c**p!! See. And see. Quote
Ricey Posted February 5, 2017 Posted February 5, 2017 Envys Iron Awe smells a bit better. Tims put some sort of fragrance in it to cover the ammonia smell Sent from my SM-G925F using Tapatalk Quote
martybhoy Posted February 9, 2017 Author Posted February 9, 2017 I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. Quote
ilogikal1 Posted February 9, 2017 Posted February 9, 2017 There aren't any official resellers, UK or Stateside. Larry is the only official seller of his products and shipping is a set price. 1 Quote
Stutopia Posted February 9, 2017 Posted February 9, 2017 I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. I occasionally order some from the US if you fancy going halves on shipping some time. Quote
martybhoy Posted February 9, 2017 Author Posted February 9, 2017 There aren't any official resellers, UK or Stateside. Larry is the only official seller of his products and shipping is a set price. Yeah I had wondered whether these companies were just importing and putting on a markup. I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. I occasionally order some from the US if you fancy going halves on shipping some time. Let me know next time you are ordering and I'll certainly check out my supplies haha Quote
teejay Posted March 8, 2017 Posted March 8, 2017 can anyone tell me if this iron out removes c5 in the cleaning process Quote
ilogikal1 Posted March 8, 2017 Posted March 8, 2017 can anyone tell me if this iron out removes c5 in the cleaning process I can. It does not. C5 can withstand acids like fallout removers but will be weakened by strong alkalis (such as "non-acidic" wheel cleaners). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.