ZMANALEX

Hi and welcome to the forum

The cam box is just another name for the rocker cover. There is one on each side of the engine. To remove the spark plugs you have to insert the plug spanner down through the hole in the cam box to get to the spark plugs. There is one seal for each spark plug and the seal is above the spark plug so the oil is running down the way. Any clearer ? You have pm. Cheers, Alex.

All parts in stock and available for same/next day shipping You have pm. Alex.

Hi and welcome to the forum

Lower control arm: 30 mins. Compression arm: 60mins. The cross brace is easy to remove.

Ferodo DS 2500 Pads available for same /next day shipping Probably the best and most affordable pad upgrade available on the market today. viewtopic.php?f=38&t=27438

It will be the seal in the cam box gasket mate (not the gasket) The seals are not available separately so a replacement cam box will be required. I have plenty of these available. If you can change the plugs then you will have the necessary skills to swop out the cam box. Give me a shout if I can help you further. Alex.

I previously stated, more than likely the non return valve which sits in line just above the brake servo. The windscreen washer bottle which is on the driver's side sits behind the bumper and has two pumps, 1 for front and one for rear. The headlamp washer bottle also sits behind the bumper but is on the passenger's side and has only 1 pump. Alex.

At least a day to replace the headers with engine insitu

Welcome to the forum Steve Have a look at the links below. Drop me a pm if I can help you further or you can pm me over your number and I can give you a ring to talk you through the options. viewtopic.php?f=38&t=27436 viewtopic.php?f=38&t=31543 Cheers, Alex.

If you have no joy with LEE then I have these parts in stock

Hi and welcome to the forum

Hi and welcome to the forum

Preowned MAF sensors, front and rear o2 sensors all in stock for JDM and U.K models o2 simulators also in stock All available for same/next day shipping Just send me a pm if I can help you further. Cheers, Alex.

Hi and welcome to the forum.

The only cost effective method to fix this would be a quality repair from an Automobile Upholsterer. Unless you have 5k to burn on a new roof. Alex.

Hi and welcome to the forum.

I like that colour on your new Roadster Jamie.

I use Innovate LM2. It reads UK and JDM Alex.

The PAS pump is driven by a belt off the crankshaft pulley. You have pm

Nice one Stew In stock and good to go same/next day. Cheers, Alex.

Nice one Dave, looking

Sam, CDO #2 is the later box and Nissan XZ Gear Oil SAE 75W-85 - API GL4+ is the stuff to go for. Alex.

Remove the two large bolts holding each calliper on and slip the callipers to the side and tie up. Slip off rotors to access the studs. You may have to let off the handbrake cable adjustment on the rear to get the rotors off as the handbrake shoes are within the rotor. Alex.

I have a preowned B & M short shifter coming off a Zed on Monday Drop me a pm if of any interest to you. Alex.