ZMANALEX

Be carefull with these mate as I was advised by Denso Technical that these were not suitable for the 350Z and to stick with Denso Iridium. I can't remember what the issue was, however I will look back my notes when I have a minute. Alex.

Eibach are the market leaders and probably provide the best spacer for the 350Z. In stock and good to go Width will depend on what wheels and tyres you are running and how aggressive a stance you wish. 20mm and 20mm is popular as is 20mm and 25mm Drop me a pm if I can help you further mate. viewtopic.php?f=157&t=42415 Alex.

I have a pair of Genuine front floor mats with the 350Z emblem embroidered in. A bit of normal wear, as you would expect, on the driver's mat but no holes. £30.00 Drop me a pm if I can help you further mate Alex.

Brembo style rotors and pads will be required to marry up with the Brembo calipers. All in stock if required Alex.

Nice one Ken Look forward to meeting you mate Alex.

Irfan, You not going for the nosh afterwards? Alex.

Hi and to the forum There are a few similar old codgers on here, so you will be in good company

You have pm on its way with my contact details Alex.

Yes, thay are adjustable, however it is engine out and cams off. The gaps can be checked and the cam lobes inspected for wear with engine insitu by simply removing the cam covers. Best to get a pro. to have a listen before you start ripping your motor apart. Alex.

The rear pads, like the front have two pins holding the pads in place, and not one as suggested if you are running Brembo brakes.

Best to get the noise professionally diagnosed before considering additives etc. Alex

Andy, I have the main engine undertrays in stock mate with all the fasteners. These are brand new genuine Nissan undertrays. Drop me a PM if I can help you further mate. Alex

Hi and back to the forum mate:thumbs:

Hi and to the forum

Hi and to the forum

Here you go viewtopic.php?f=157&t=21691 viewtopic.php?f=157&t=21842 Alex.

May be the cv joint clicky axle issue, or perhaps the pads moving in the rear caliper. Alex

They are called body side roof mouldings, and I hope that you have deep pockets as they are circa £300.00 each. Alex.

I would not worry about this to much as air filters are replaced daily and CAI kits are fitted on a regular basis. You do not mention which type of filter or CAI that you have fitted. Perhaps it is a fitment issue or a simple reset may be required. Good idea to swop back to oem to check for comparisons Give me a shout if you are still having issues and I will send you links for the resets. Alex.

Bank one is R/H - Driver's side if RHD. Cam Position Sensor is positioned at the rear of the head. Alex.

Remove the tail lamps to get to the tail lamp bulb. Gently flick off the 3 black plastic bolt covers to expose the 3 retaining bolts. It is only a 5 minute job. Alex.

Tail Light Bulbs

Not quite my neck of the woods Chris. Why not run the above companies past Ewan at Clarks MS. Alex.

back mate