Mikey_S

Check the seals on the quarter panel air filters, mine degraded and started letting water in the boot well. From the picture it looks like the left one is broken.

Hi all Since selling my Z, i have a few parts available for Sale, only looking to recoup what I paid and not rip anyone off. These parts were never installed (bar the relays) and are all intended for a DE/Rev-up 350. Exedy Clutch (OEM Replacement) - £210 (release bearing and 8x replacement bolts included) SOLD LUK Dual Mass Flywheel (OEM Replacement) - £250 SOLD BUNDLE: I would be willing to bundle it together for £350 COLLECTION: Due to the weight of the clutch and DMF I would prefer these to be collected (from Bristol or Swansea) or if you want to arrange a courier yourself to collect then I am also open to this. Tarmac Sportz clutch service Kit - £60 1 x HEL Performance Braided Clutch Hose- Transparent 1 x 500ml Motul RBF 600 Factory Line Racing Fully Synthetic DOT 4 Brake/Clutch Fluid 1 x Centric Clutch Slave Cylinder SOLD Also for sale Replacement dial covers (purchased from Zmanalex) - £25 (incl. Postage) Replacement headlight relays x 2 (purchased from Zmanalex) - £10 each (incl. Postage) Lastly - for free to a good home, a 350Z Haynes manual (no picture). Someone from the Forum passed this on to me for free bar a small donation to the forum to cover postage so I offer the same - CLAIMED Payment by cash or bank transfer. Please feel free to PM me any questions and also please let me know if there are any issues with my listing etc. Thanks Mike

Anything stuck under the car? Plastic bags etc stuck and melted to the underside?

A nice little investment may be a OBD reader (and associated app) Helps identify these issues. I have the below one: https://www.amazon.co.uk/dp/B01AC7I7BO/ref=cm_sw_r_cp_apa_fabc_QP5D5XHBW05Q0FZK72BA?_encoding=UTF8&psc=1 Hope you can get it sorted though quickly and inexpensively

Will have some parts available for sale shortly but need to take photos with my username in but fyi I'll soon be listing Exedy Clutch (with release bearing and bolts) LUK Dual Mass Flywheel Tarmac sportz clutch service kit with braided line, slave and fluids 2 X headlight relays 3x replacement dial casings (the info battery and oil pressure ones) I also have a Haynes manual for repairs which I'll offer for free (as I had it from a member on here also for free? Hopefully I'll get the post up after the weekend

If you take the T pipes off the wipers, do you still get water out of them? When I refurbed my wipers the jets packed up, turns out they were full of crud so I spent a whole afternoon (really!) Pumping hit water through them with a syringe, blowing them through with compressed air and digging crud out with a stripped down paperclip Worked perfectly after that

Sold - please lock

Thanks @Dicky I hadn't seen the response above the latest. Yeah I think think mine was due to over revving. Not experienced it since and pedal is back to normal. It had a squeak the other day but that's ironed itself out now also. Cheers for the info

Photos and descriptions updated.

Cheers Andy, it'll be a shame to see the Z g but needs must

Reluctantly I offer my 350z in Silver for sale with 77,768 miles on the clock. This is a 2006 rev up model - GT spec. New home / family commitments are the reason for sale. I purchased the car with approx. 68K on the clock and covered less than 10K in 2 years. I've not had a chance to give it a spring clean yet so please excuse the grubby floor mats in the pictures. Good bits: HPI Clear / No outstanding finance etc on the Vehicle New MOT until March 2022 Full service history The most recent service carried out by a local Nissan specialist in June 2020 A full P3 service with sparks and belts also being replaced. (I have receipts for all fluids and parts purchased) Recent oil change carried out by myself in February 2021 The car is clean, accident and dent/scratch free Relatively unmodified bar a JWT pop charger (cleaned and recharged a week ago with a K&N kit), a pioneer head unit 25mm rear spacers and 20mm front spacers 18" Rays forged alloys with Falken Tyres Replacement Xenon bulbs, igniters and ballasts at the end of 2020 LED replacement bulbs in the boot, number plate lamps and side lights Wiper arms have been refurbished New Bosch Aerotwin blades changed in December 2020 New Bosch S40 battery in November 2020. New rear quarter panel filters in Jan 2020 Replacement passenger window motor by dealer when I purchased the car in 2019 New number plates in summer 2020 to replace faded originals. Refurbished interior trim Centre cubby and dial plastics resprayed with hard wearing matt black paint to prevent scratching (Particularly the door plastics) Car is GT spec: Bi-Xenon lights. Brembo brakes. Heated leather electric seats Bose sound system Cruise control. Electric folding mirrors Colour coded parking sensors OEM 350z floor and boot mats. Original spare wheel and took kit. 3 keys (1x valet key) 350z OEM document wallet All purchase and sale paperwork from previous owner. Points to note: This is the model that lands in the higher tax band for 2006 registered cars Usual stone chips on front bumper for a car this age and the odd chip or two on the wings which have been touched up Alloys have bubbling/ peeling paint and have some minor kerbing (all 4 affected with the bubbling/peeling) I've removed the locking wheel nuts and replaced them with standard OEM nuts Looking for £7300 - Based in Bristol Any questions, please don't hesitate to ask here or send me a PM.

thanks for the advice. Yes I've a rev-up so its external. Can you get to the slave without jacking the car up? I've got a replacement slave kit I purchased from Tarmac when they had an offer on but didn't want to swap the slave until I did the clutch and flywheel. WD40 good enough to grease it?

Hi, hoping someone can advise on the below... Always seems to be something wrong at the moment. My clutch pedal when lifting off makes a loud squeak which is audible outside of the car. Clutch seems to be operating ok but it also makes a clunky noise but pretty sure it's been there since I bought the car. Short video below. https://youtube.com/shorts/vBg8ryjbEV0 What do you reckon? Thanks Mike

Got them off this evening, replaced all 4 with standard nuts. One more job off the list!

Quick q, Is the recharge stuff good? I ordered some yesterday for my pop charger

@ZMANALEX may be able to offer some advice. If you're close to a specialist it may be worth taking it to them to give it a once over. Horsham dev etc

I'm sure someone with more experience will be along shortly to advise on Tyres and Brakes however for Oil and Filter - check out Opie Oils, put your reg in and it will list the correct oils and filters, they usually do a discount as a service 'kit' and have voucher codes running most months. Defo worth a look.

That arch repair though

@Dicky did you ever get to the bottom of this? My house is on a steep-ish hill with little manoeuvre room so it can be a pain to reverse park Past two times there's been a weird smell, drives ok though but the clutch pedal has become a little spongy / noisy when it's being operated etc

Crazy price but yeah, its certainly raises alarm bells. Where are you based? Any Nissan Z specialists around? Offer them a sweetener to come and see it with you

Have a look at @vroom811 videos, some really helpful guides and he's just done a full strip down of his underside. Use that to compare yours and you should have a really good idea of what needs doing.

My dad had a final salary pension with British steel, luckily he got out before it went tits up but a lot of his pals got totally shafted.

Great colour, car looks good from the picture. Fingers crossed it's just routine maintenance stuff that needs doing

This reminds me that I need to look into consolidating all my small pots from various jobs I've worked before. Have a few public sector pension pots, each with a few years contribution and a few private pots but recently as my employer has been quite generous with pay rises recently I've whacked up the % I pay coupled with a salary sacrifice scheme to try and give me the best possible chance at an earlier retirement

Absolutely, can't wait to take the Z out for a proper trip rather than the occasional jaunt to Tesco!