Jump to content

davey_83

Regional Event Organiser
  • Posts

    6,970
  • Joined

  • Last visited

Everything posted by davey_83

  1. davey_83

    cone air filter

    great price!! its very well made. mines the same as the link 80mm od neck, 200mm base diameter. not sure if my intake pipe is wider but its a tad longer than OE pipe = greater volume of filtered air. Simota 6' vs Ramair 8' K&N decal, swapped for RAMAIR one now
  2. davey_83

    cone air filter

    Yep same, 8' base too LOL
  3. In turn unplug a coil pack while engine is on tick over and if the idle is worst for the moment that coil is working ok.
  4. davey_83

    cone air filter

    In that case you'll love the sound and if you loose a few hp @ 6250-6350rpm, for split second i doubt you'll even notice it.
  5. davey_83

    cone air filter

    what filtration setup do you currently have? you'll also need a silicone hose to join the maf adapter to the filter
  6. davey_83

    cone air filter

    I believe conceptua tuning on eBay do the MAF adaptors for our cars. I bough the orange based filter as that suits my engine kolor scheme, they do silver and black if that works better for you. Detween the MAF and the air intake duck in the front panel the filter is wedged into place and pretty much the biggest filter that will fit in the space LOL sounds great
  7. What tyres do you have on now and how do you rate them? David
  8. sell it as is will net you cicra 1k more than a standard car sadly. break it ie sell a standard ish very low mileage painted 350z then sell the goodies afterwards would net you the used value of all those bits ie 2.5 - 3k but takes time.
  9. davey_83

    Integra DC5

    always wanted one these, but never scratched the honda itch
  10. very nice Fiesta that, love all you doing with the Zed also
  11. davey_83

    cone air filter

    cheers for the link.is 80mm the correct diameter for the 350 DE maf pipe to fix to ? For the MAF you'll need an adapter which will be 76mm OD, thus needing a 76mm to 80mm reducer silicone hose. I had a spare so cut the flange off leaving a straight through MAF, using the above reducer hose and it looks much neater too. David
  12. well done that man!!! good times David
  13. davey_83

    cone air filter

    This is mine http://m.ebay.co.uk/itm/RAMAIR-LARGE-ALUMINIUM-HIGH-FLOW-FOAM-AIR-FILTER-80mm-OD-NECK-IN-ORANGE-/390694114781?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253D2f42fcbd679c40cc8cc7125322eac3e5%2526pid%253D100408%2526rk%253D1%2526rkt%253D24%2526sd%253D390694928360&_trksid=p2056116.c100408.m2460
  14. Ahh wow didn't know that, I used the embedded links but that didn't work either - nice one
  15. Links to me on track in my 350z at Japfest Rock on Sunday. Enjoyed it, maybe a tad too much but all good fun. Sorry for the poor quality David
  16. davey_83

    cone air filter

    I've just bought a 200mm base Ramair of eBay, would buy again as seems really well made
  17. some dyno's read lower than others, 295bhp on one set up could be 275bhp on another.
  18. CAP at the moment says £8150 - £8395
  19. great GT cars and good bit of fun on track too
  20. I love the sound of launch control, but like you doubt I'd use it every day lol
  21. Car looking fab in that video, thanx for sharing
×
×
  • Create New...