Jump to content

a2orry

Members
 View Profile  See their activity

  • Posts

    355

  • Joined

  • Last visited

 Content Type 

Everything posted by a2orry

  1. a2orry
    If you have a electric sander of some sort I would give it good going over with medium then fine grade papers.
  2. a2orry
    Excellent thats the sort of thing you do wile the adverts are on.
  3. a2orry
    I wonder what is easier to deal with corrosion or woodworm.
  4. a2orry
    I would double check all the nuts and bolts just to be sure. Depending on how much force you put on bolts first time round you could have damaged the gear box if it was enough to push the first motion shaft out of line can you record the noise.
  5. a2orry
    I like my start button 16 quid off ebay no more pressing the clutch pedal.
  6. a2orry
    Go to a body shop suppliers they won't have a pen but will mix you a tenth of a litre.
  7. a2orry
    having had jap stuff before you will know that the pain is easily scratched go lightly with the clay.
  8. a2orry
    I'm ten minutes from Glasgow probably the other direction . Welcome to the forum.
  9. a2orry

    Single exit exhaust

    a2orry replied to Desey's topic in Wanted

    Blitz nur spec
  10. a2orry
    No to steam cleaning of eny type of engine way to many electrics.spray can and a cloth is the safe way to go.
  11. a2orry
    Nice little aerial . Polishing the inlet manifold is a nice mod and will look top class with the thick strut brace.
  12. a2orry
    K4 has two back boxes that you will have to make a y type pipe for fitting it to the single centre pipe .
  13. a2orry
    Duel mass flywheel feels like it's going to shake the car to bits when it's at the end of its life.
  14. a2orry
    Tuning a bit out after fitting decat pipes running rich time for uprev.
  15. a2orry
    Is ther any chance the springs are on the wrong shockers.
  16. a2orry
    Heat shield on the y pipe if it's original nissan.
  17. a2orry
    If noise is going to be an issue have a look at vein type .
  18. a2orry
    God forgive me I must of wrote chav instead of drive can't for the life of me think why.
  19. a2orry
    You have way to much time on your hands. Well spotted
  20. a2orry
    If you get the revs clutch gear change spot on . Be carefull or one of the chavshafts might break.
  21. a2orry
    you must be the only one thats done all that and still has a fishing rod stiking out of ther quarter panel.
  22. a2orry
    looks like a step back in design.
  23. a2orry
    If i had that problem I would be thinking the water pump as it will pump water through the larger radiator hoses with the thermostat removed but put the thermostat back it can't pump water through the smaller hose to the heater matrix may be the impeller is loose on the shaft.
  24. a2orry
    Ther is a spigot bearing fitted to the end of the crank shaft worth doing when the box is out I would assume the garage fitting the clutch and fly would recommend this .
  25. a2orry
    Compression test if that's good check wireing.
×
×
  • Create New...