Grundy

You haven't moved it, you've just created another thread -.- no need for it, ask a mod to move it.

Why go for single mass then? Sounds very wrong to change it for something that will rattle. I'd hate a rattle at low revs. Performance #teamtarmac

Fit a lip for Temp fix, cheapest option - If you're quick you might get in Tarmacs group buy thread. However damage will always be there and will need removing at some point. That damage isn't really worth a full respray. Could try dropping Mouthwash a PM as he live local and has his bumper sprayed a few times - Might know someone local.

C'mon, it's been covered a billion times what mods you need for a remap, I'm pretty sure you've asked before If your country is that strict, it's really not worth it. Just focus on handling/suspension.

Don't think you should blame players for leaving for more money...Not there fault...If you're offered a life changing sum of money to move jobs, you're going to take it... Blame the managers etc for setting ridiculous prices.

Was about £1400

Some criminal was using a jammer at the same time you were pressing your unlock key, to gain the codes to unlock you car tonight while you're sleeping

He may have two garage doors in the 1st picture, would also explain that the side door is out of shot. and in the refurb he got rid of the 2nd garage door. Good shout, very possible Either way... his before picture looks about as good as I could hope my after picture to be! He has one more garage than I have

He may have two garage doors in the 1st picture, would also explain that the side door is out of shot. and in the refurb he got rid of the 2nd garage door.

Does your garage look like the 2nd one Matt? If so, can't wait to work on my car next sunday!

Probably doesn't help but my Mines copy lip is not a good fit so am replacing it with GT style on the basis a) I like the upwards "swoop" in the middle and the sides look a little less severe than the NISMO unit. Probably visit TQM in Fleet to have fitted/bonded/glued/nailed/hammered on, or whatever process is needed...! I just know getting the Mines copy off is going to be a PITA tho! David Anything after market is going to be a gamble on fitment. Some fit fine, some fit terrible. All depends on how often the mold for the product has been used.

We had a stranger hogging your spot

My old Nismo lip

Or just choose the IMG link on photobucket, easiest way.

http://www.tarmacsportz.co.uk/japan-racing-wheels.aspx Plenty of wheels for Zeds on that site buddy, have a look through the different brands. All seem to be in your price range

How much extra oil is needed?

My friends freshly wrapped DC5 You pay for what you get.

Love it,thanks dude Think that was coming back from Sound Test

Thanks for the reply, What sort of damage can I expect...is it eventually going to splinter off and shatter the clutch?

So a friend a couple of weeks ago didn't think my car sounded right. His guess was the input bearing, I told him it was just the noise of a Stage 2 Clutch, SM Lightened Fly. However my car does sound almost identical to that whine in the video. Question is, is the video and my friend correct? If so How much is the bearing and the job? I'm planning on changing the slave and master cylinder, is this process in the same region that I can do the bearing too, or completely different?

This everything I need to just bolt straight onto my car?

Genuine copy from Amazon - a Thread somewhere on here about someone who bought one from Amazon, fitted fine and had the CS seal of approval init.

Horsham Have a Month waiting list? -.- well thats me not getting to see them any time soon :/

Some shots shared by Super Car Siege.