Stutopia

In terms of planning permission (generally speaking), I'm a first time buyer looking for a place and I can't find a house to buy with a decent sized garage, but there are loads with single garages and lots of adjacent space in some sort of useless green area (I think they are called "gardens" not sure what they're for ) Is it a big deal to get planning permission to extend an existing freestanding structure a bit wider - assuming it's not over some critical water/sewage piping?

If it was Porsche, it'd have to be a black or white 964 C4

Lyndzzz is correct - it's during the unbox

[quote name='chirag1988' timestamp='1452074607' post='1570452'] Hey Stu, any news on when the pics will be chosen and calendars being made? [/quote] So close, I'm just waiting on an email response from the printers and, depending on the response, we should be good to go.

V8 Vantage, just because it's on the list.

Wow, that's a packet of wine gums off 370 money.

You mean post #106 I'm confused, it's says 107

Post #107 in Mopedmarks build http://www.350z-uk.com/topic/80743-mopedmarks-build-threadmajor-updates-page-6-onwards/page__st__100 Is the best thing I've seen anyone do in that space apart from replace the lot in chrome goodies.

I like the smell of Dodo Juice Tarmalade, but It's the only tar remover I've used, so I can't say if it's good or not versus other products. It's more of a topical product than a "wipe down the whole car with it" so it comes out during claying when I see a tar spot. Also it's made of fruits and superfoods and hippies and stuff, not nasty chemicals. So it's a win for the polar bears. Did I mention it smells nice too

How many miles has it done?

Can't believe you're selling, been fun to watch you build it. GLWTS

Didn't cars only come in black Hammerite finish back then

Saved me about an hour ahahah, cheers pal! Sent from my potato using duct tape All IMO of course, wait until ilogikal1 and Ricey turn up with 15 more steps for you

For me, there's not much in drying before you clay, may as well clay with the clean soapy water for lube. And if you're doing an IPA wipe down, I personally wouldn't bother with another wash after clay, just rinse it off. But that's just me, I know there are purer, more dedicated types out there.

Silly question, how do you know if has worked? Haha, just clear the remaining product off and shine a light to it? well we have a couple of clear days... a year hahaha Sent from my potato using duct tape Find a small place on the car with some defects, but out the way and test there (rear passenger side is miles away from the driver's door ). A narrow beam light is a great way of finding defects, re-checking the area and then deciding if you need to adjust your combination of compound and pad. Go easy to start with, get it right and you should be ok. I know the Zed's paint is supposed to be soft, but it took me a good while to shift a few scratches with a DA and a menzerna soft paint kit. If the car's new, be really careful to check for any unknown repairs that might have been done by PO.

Safari for normal browsing, Chrome for if you want to access flash content. Then you never had to install dirty, resource hungry, unstable flash software on your Mac and you can keep Chrome memory leaks to a minimum

Makes sense ... not happening on Safari https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons

Sounds like ransomware, watch out for this guy

Got a screenshot? CMD-SHIFT-3 on your Mac. If in doubt go here - https://www.malwarebytes.org/antimalware/mac/ Install and do a scan. It's good and free.

Doesn't say if the monkey is included, or anything about the stuffed toy either GLWTS!

About 1:30pm on 30th, gave you a wave. Plate spells JOEY, sort of Anyone on here?

Not driven any, Atom or Lambo + Porsche FTW

I had one handy when mine went, so the RAC chap swapped it out on the drive whilst I "supervised". For Bank 1/Driver's side he didn't remove anything except the sensor and he did it from above, not underneath (it's way too high up to go in from below). He did struggle to get the green plastic release slider to play once the sensor was out but we did a quick YouTube search and unclipped it thanks to this vid ( see from. 30 seconds - I know this Bank 2 but it's just the green slider clip bit) There was not much slack in the loom so it was quite confined, suggest getting a small light up there and a towel over your wing to prevent scratches. Some swearing might be required too. Usual disclaimers apply!