jumping350

well guess its scorpion or oem for you matey

Let me know how you get on i have a mate in reigate who can do it if need be,welders in S.E are hard to come by or charge you loads!Hopefully it will get welded today cant see it taking more than 10 mins to weld...or if you want it done asap ring RSR in croydon they will sort it

Im in SE too you manage to get it sorted???

i meant both at the same time ive only seen it on one side or the other...as in Nissan asking to replace both the centre pipe and back box i might be wrong...i usually am

very hard to believe that the centre pipe section and rear box section have both rusted through but ive not seen it....see if you can get under and have a look ...like above states £50-60 quid welding job and im sure if replacement is the option only one section will need replacing. Tell Nissan you will think about it and never go back !!! Have a look what bit you need and PM me and il point you in the direction of some cheap OEM replacements on ebay if you get stuck but give tarmac a PM first If you tell your insurance company as most do on here they sometimes add £20 or so to your premiuim or say it doesnt matter Were in SE are you??

IMO useless im no formula 1 mechanic but when i go in there with a basic question as a Nissan owner 'Cant help you without your reg number and yours is an import and we cant look that up' The guy last time said i might aswell not bother ringing them up for stuff because they cant help!!!! Even though i could potential be spending hundreds there baed on the car i own Dealers are only good for bringing cars into the country il buy from somewhere else after that

i done mine last week everything in the above mentioned was done...and auxilary belts check to see how there looking Unless your dhalsim i dont see how you can get the filter off without taking the undertray off i will have to investigate how its done!!

i was always taught to nail the clutch control can get out of any problem then...empty car park and plenty of stop - starts before you hit the open road...sorry i meant... Stop..Handbrake...Mirrors..take off handbrake ...Start

very very wish i had one...whats the light in the middle of the rear bumper not all the 370z have that??

Thanks for advice guys ...your exactly right thats why ive got a gunmetal door on my table that my gf isnt happy with not a silver one in sight... ive stripped that door anyway so if it had to get sprayed its prepped and ready anyway im gonna look into having the skin repaired then and see what the outcome will be i didnt realise you could unbolt the frame part of the door. Thats abummer about fitament issues as this is what i was thinking but would seem the easier option as i have the complete door motors everything so would be spray rebuild then straight swap. repair would mean car going in for a good while i think but if its best option it will have to be done

so you reckon better option is to repair?? if i was to put the other door on would that be ok to be blended in??or is the other door a whole side option?? Thanks for help il look into where i can get it done...any good reccomendations in the south anyone??

there must be someone somewhere that can do this...it will go well with your new rear leds eh Tom im only joking i missed out by like minutes i too like you have been hunting for a while im sure your zed will look ace with them all web ones seem U.S originated and like coldel says the beams will point wrong way then.

Well up to this point ive refrained from posting pics up of the damaged zed... its too painful Im in a prediciment now ive got another door (Gunmetal- thanks to it looking like blade silver in the pic!) Any way if im to put this on apparently im gonna have to spray the wing and rear to match! Someone i spoke to said my door is repairable im not to sure as its dented along the crease...anyone reckon i can fix it or will it be a full swap and side of car respray?? obviously i would want to do the cheaper of the two as im poor and would prefer to keep my original door to any comments greatly appreciated!! oh yeah i too am miffed how the side skirt came out pretty much spotless too :shrug:and yes i know i need spacers

that is a very good point

what other option is there then?? i guess that flyeye stuff might be worth a shot... ooo just found these might be worth a stab http://www.ebay.co.uk/itm/03-05-Nissan- ... 1c2142d6dd

Thats why i havent tried...i wanted these but dont know if they are off a newer zed, a random aftermarket light or someone has D.I.Y them???

+1 my oven isnt big enough whoever the mystery member is please hurry before i george foreman grill them

im gonna cry now

il take second dibs on the lights if they fall through

i do understand that, thats fair enough but some of these things its the second time around they been up cause no one bid on them before so thats why i put some of them up...if thats the case il stop but then why is there a 'spotted on ebay' section then?? I only post it up cos theres a section for it if there wasnt a section i probably wouldnt do it

Replacement reflectors 07+ i believe http://www.ebay.co.uk/itm/Nissan-350Z-f ... 4843028587 Back box http://www.ebay.co.uk/itm/Nissan-350z-E ... 1c215c3df2 Japspeed decats http://www.ebay.co.uk/itm/nissan-350z-d ... 3cbeeb562d Nismo Replica rear spats http://www.ebay.co.uk/itm/NISSAN-350-Z- ... 2eb98c32ca

who needs the ebay codey thing...you have me and coldel on the case 24/7 you will put us out of being bored at work...well at least me anyway

Bit closer in chessington i always take mine to Simpsons,Have known ray down there for years always does a good job knows his stuff and is honest with you from the start...good prices too!!

had the m.o.t done in november and no signs of any wear so all good my other mate has a garage so when ever i think theres something wrong it goes up on the ramp but no what you mean about not having full access ive been looking at alternatives to four ramps lol hopefully i will construct something in the new year so i can get the whole zed up in the air without too much fuss

looks a better attempt than my first go, nice one!! I put up a guide and still got in trouble with it Im hoping attempt 2 will go better