jumping350

Hi mate ive got the exact same car (off the road) mines cyclone blue though I wouldnt go through insurance it would end up costing you way more let me know what you need ive got crap loads of parts..including mugen front bumper!!!!Drop us a pm mate

im up for one of these if hes back

i would have loved to have spent 10 minutes searching but was on phone in the rain and my seats were getting soaked needed immediate response!! It seems fine now but will take it apart and give it a clean and see if that helps and look into getting another...bit of a bigger asi have a spare passenger one!

right handy trick if this happens to you hold door open put keys in ingnition flick switch up and bang the bottom of the door ...window up!!! does this sound like a new motor then? window goes up and down fine now and even drops when opening and closing door

Just put window down and now wont go back up ..and its raining The passenger one works fine..it hasnt been struggling or anything up to this pointanyone know were the fuse box is for it?? when i press button nothing happens no noise nothing any help thanks

Yeah il prob have to just do that, 2 of the oems are at gf so will have to trek them back somehow just dont have a whole day to invest in doing all four at once

im not going to do it but my rotas would still be on the rear of the car just the oems rear on the front..still sounds dodgy though and i know the TCS is a pain when it comes to this stuff Just out of interest if i swapped them over one wheel at a time but for the correct original oem 17 one would that cause it to play up also?? I just re read that sentence and ima numpoty that wouldnt be a problem cause the rolling radius would still be the same!!this always confuses me

il have to go pick the other two wheels up then even more missons now Thanks for your help buddy

oem 17s on mine are rear 245/45/17 fronts 225/50/17 my Rotas are Rear 255/45/18 Fronts 235/40/18

Im spraying my Rota GTRs and was wondering if i could put my OEM 17 rears on the front without any bother while i get the fronts done?? couple of days on the car max

just out of interest did the fox die??it looks alive in pic 1 not worth insurance job source the parts and do yourself

theres some 350z bride rails on ebay http://www.ebay.co.uk/itm/350z-Bride-se ... 1c22a17818 http://www.ebay.co.uk/itm/350z-Bride-se ... 1c22a1784d not long left if no one bids offer him a sum for both dont think they will side mount if im right???so may not be what your after

guess you could say the same for my zed really..dirty great big scratch on the bonnet giant dent in passenger door...dirty....would look abused to anyone but i spare nothing come the engine, cars never been near redline under load and runs great i had to buy another door and bonnet because i knew would never sell it like that at the moment with all zeds that are out there currently! Cosmetics are quite dear on the zed and some people these days cant seem to justify to pay it..but if you know a few people can get it sorted pretty cheap..if i put my zed up for sale today on here you would all say 4k max cos of damage..if i fixed it you would say 7-8k i paid £100 for bonnet and £200 for complete door (looked for well over 7 months though) OP could be a bargain if you haggle him down under 5k...if you dont mind little project can be as you want for not a lot much more money though that k&n does look iffy! mine looks nothing like that check engine history and usual wear and tear items to see what state its in

your lucky mate ive had my zed a few years and only found this out the other month...welcome to zedhood

F1 was ok for a bit but wearing thin with me now ive not seen GT1 sounds great..but i look forward to Moto GP every year ..the only thing predictable about Moto GP is..its unpredictable!

after sizing up my decats i noticed unless im hulk i will not budge the cat to y pipe nuts so making life easier and getting another y pipe and will just replace whole section in one go!! let me know if you got one lying around am in london/surrey if your there even better

see i was going to attempt this the other day too,ive got APC racing ones dont see how i can get my arm up there unless im dhalsim and if with rusted bolts .ha!!! thats why the car is not on a trolley jack as we speak!! and i have lots of skin!! want to do it but after almost burning my face off getting centre pipe free im sure my lifes in danger with this one...were you based rm cya??

cheeky git I know its down to personal preference but it was more that I wasnt sure if I could use an aftermarket backbox with the rest being OEM quick answer ....yes 3 options eally 1.weld and just get through m.o.t 2.get aftermarket now and not worry about it for next few m.o.t's 3.get oem back box with likely hood of it failing at a random time but could go for a while

I completely missed that on Ebay. Cheers, that could be perfect. Haha im sure coldel like me still has the ebay hawkeye

well you might aswell go aftermarket any oem one you get will ultimately just do the same again your better to go y pipe back then you should be fine for years to come

i used to use a guy from the audi garage he didnt work for audi they brought him in done my mates a5 coupe wheel (that i curbed ) looked better than the 3 untouched ones in the end worth a quote at least ring up audi and they will give you his number

http://www.ebay.co.uk/itm/Nissan-350z-Y ... 23188b68e6 great condition this one

go for it mate ive got blade silver..my rear window and little side window are quite dark and my pass/driver window have light tint looks cool...gonna spray my handles,badges,rotas black and carbon the roof to match...cant wait then il change my avatar looks nothing like that now been photoshopped but can see rear tints

doubt very much you will pass without cats..i think its visual now not just readings so if they see no cat they prob wont even bother running emission test..straight fail! see if anyone else on the forum has decats near you then can maybe negiotate to borrow them come m.o.t time or at least buys you a bit of time to find some good priced oem ones i like the sound of those motordyne ones i didnt know you could do that..learn something new everyday me and my mate used to share one cat between two civics

doubt very much you will pass without cats..i think its visual now not just readings so if they see no cat they prob wont even bother running emission test..straight fail! see if anyone else on the forum has decats near you then can maybe negiotate to borrow them come m.o.t time or at least buys you a bit of time to find some good priced oem ones i like the sound of those motordyne ones i didnt know you could do that..learn something new everyday me and my mate used to share one cat between two civics