SHEZZA

If your Zeds a HR then you definitely want to be changing the slave cylinder while the clutch is out.

@Asad is your man.

Nice reflection davey

It’s possible @P15UL T has done it.

Horses too !

That’s Mint !

Welcome along. Why wait till spring we’ve got the final midlands meet this Sunday.

Welcome along. He kept that quiet. Great zed you’ve got yourself.

This will only fit a cobra back box.

1) davey_83 2) Charlie boy 3) Valy 4) Justthejedi 5) Andy_Muxlow 6) Secretstar07979 (Adam) 7) Dania350z 8) Cob1980 9) T4uvp 10) Mopedmark +1 11) Tinyflier 12) SHEZZA + 1 13) robman23 +1

You can get MPS4 in the stock sizes. Check out tyreleader https://www.tyreleader.co.uk/car-tyres/michelin/pilot-sport-4/245-40-zr19-98y-575898 https://www.tyreleader.co.uk/car-tyres/michelin/pilot-sport-4/275-35-zr19-100y-756835

1) davey_83 2) Charlie boy 3) Valy 4) Justthejedi 5) Andy_Muxlow 6) Secretstar07979 (Adam) 7) Dania350z 8) Cob1980 9) T4uvp 10) Mopedmark +1 11) Tinyflier 12) SHEZZA + 1

It’s always advised to replace the flywheel when replacing the clutch as you’ll be only paying for the flywheel it self basically as part of the clutch change. If your sticking with the OEM set up it’s best to use fhe OEM Exedy clutch and LUK dual mass flywheel. For After market the extreme clutch kit is a good step up. Also if your Zeds a HR you’ll definitely want to be getting the slave cylinder replaced too. https://www.cougarstore.co.uk/nissan-350z-clutches-12-c.asp

Cracking result mate. I really must get mine done !

For used @ZMANALEX

Loved the meet today mate and wouldn’t hesitate in going again. Next time though I’m thinking pub and a meal where were all together would be best, end of season get together if you will

Cracking day today we really enjoyed it, thanks for organising @davey_83 Great seeing and chatting to all the usual suspects and meeting others. Sorry if we didn’t get chance to say good bye to you all. Till next time.

Yes it would of had to come off to replace the banana arms.

There you go

Yep I’ll be at the rendezvous point.

@ZMANALEX is doing/was doing a cracking deal on this clutch kit and dual mass flywheel

Looking great ! Have you thought about getting some black nuts ? a set of these would finish them of well https://www.nengun.com/nismo/wheel-nut-set @ZMANALEX might even have some oem ones kicking about

1. davey_83 2. 14N 3. Andy_Muxlow +1 maybe 4. SHEZZA +1 maybe 5.

The main gain is the smile you’ll get from the noise.

Hr zeds did not come in azure so you’ll be lucky to find one I’m afraid. A new ready to paint one from Nissan is your best bet and cheaper than you’d think.