Jump to content

Your Number One Mod


pjf1985

Recommended Posts

So whats your number one mod out of everything you've done? Doesn't have to be the most expensive, just the mod that you're most pleased with or has improved your Zed the most!

 

So far ( haven't got my new wheels on yet ;) ) I'm going with my Nismo-style Front LIp, totally transforms the front of the car!

 

IMG_20140429_222413.jpg

Link to comment
Share on other sites

Difficult call becuase I have done so much. Chargespeed rear versus Rota Rims or Mines CF front lip for me if had too choose my top three from all my mods..

Link to comment
Share on other sites

Iv polished the ally under the bonnet.

Whats the boot pop mod

Basically if when you press the boot release button you find that the boot doesn't lift high enough and you have to press the button a second time then the boot assist popper springs could be worn.

 

The easiest cheapest way to fix this is to remove the boot assist units & their rubber covers ~ then pop some pennies or washers inside the rubber covers & refit.

 

Have a look at this thread; http://www.350z-uk.com/topic/35706-the-penny-trick/

 

Personally I wouldn't do it as a member on here does new springs & a fitting service for them which is cheap enough anyway. ;)

Link to comment
Share on other sites

Iv polished the ally under the bonnet.

Whats the boot pop mod

Basically if when you press the boot release button you find that the boot doesn't lift high enough and you have to press the button a second time then the boot assist popper springs could be worn.

 

The easiest cheapest way to fix this is to remove the boot assist units & their rubber covers ~ then pop some pennies or washers inside the rubber covers & refit.

 

Have a look at this thread; http://www.350z-uk.com/topic/35706-the-penny-trick/

 

Personally I wouldn't do it as a member on here does new springs & a fitting service for them which is cheap enough anyway. ;)

 

Who sells new springs?

Link to comment
Share on other sites

Iv polished the ally under the bonnet.

Whats the boot pop mod

Basically if when you press the boot release button you find that the boot doesn't lift high enough and you have to press the button a second time then the boot assist popper springs could be worn.

 

The easiest cheapest way to fix this is to remove the boot assist units & their rubber covers ~ then pop some pennies or washers inside the rubber covers & refit.

 

Have a look at this thread; http://www.350z-uk.c...he-penny-trick/

 

Personally I wouldn't do it as a member on here does new springs & a fitting service for them which is cheap enough anyway. ;)

 

Who sells new springs?

Peteman35 does. Haven't seen him on here for a little while but send him a PM if you're after some. ;)

 

Link here; http://www.350z-uk.com/topic/78643-boot-popperassist-springs-reconditioning/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...