350z DE DRL Reflector LEDs - All Sold

[Stu_2424]

Is there a photo of the black ones fitted to a gunmetal car anywhere you can post up?

 

Thanks

[Madhatter]

Stu - hopefully by end of weekend mine will be completed and I'll upload pics

[D8NMT]

Fitted mine last night, nice and easy with the instructions.

 

Really please with them.

 

 

 

[cs2000]

They look really good, glad you're please with them

[longsh07]

Got mine today but going to fit some LED side lights so will do it all at once.

Cheers

[cs2000]

Got mine today but going to fit some LED side lights so will do it all at once.

Cheers

 

Sounds good, as someone would say, do it nice, or do it twice!

[cs2000]

Im bored at work so thought I do some maths, this is total amount of work and parts involved in making 19 sets of these!

 

17 metres wire

568 Individual solder joints

266 LED's

1,300 ml of Silicone

around 30 hours of build time.

[longsh07]

Must have been a slow day

[Madhatter]

Mine arrived safely! Seriously good packing and love the clear instructions!

 

A++++++++++++ for effort and quality! well impressed. Now hoping to get them on asap! Thank you

[Dannyg]

Picked mine up from the postie today, be rude not of fitted them either

Thanks Chris!

[cs2000]

Glad they arrived safely, hope your happy with them

[longsh07]

Got mine fitted today

It was possible with the wheels still on but for the love of god take them off it you can

It took twice as long as it should faffing around trying to get clips out and the wiring in!

Waiting for it to get dark so I can take some photos

Edited August 4, 2013 by longsh07

[longsh07]

Really happy with the end results. The pictures do not do them justice!

 

 

[cs2000]

Look ace!

 

I fixed mine over the weekend. As I said in post 1, my prototype models were wired differently, this compromised the waterproof-ness of the unit and so the LED's failed after a few weeks, plus the solder joints were nowhere near as good and there was too much stress on the joints.

 

I now have a set fitted wired the same as you guys now that orders have tailed off I actually had time to fix mine! haha

[Hooch]

Sorry to hijack the thread but it is relevant, whats the easiest way to fit the reflectors, bumper off or on?

 

If on hows best to get access, through the wheel guard?

[Dannyg]

U need the bumper off other wise u won't be able to fit/refit the reflectors, especially on the drivers side as the washer bottles in the way,

I managed mine going throughout the wheel arch, didn't have to take my wheels off just turned them in, was fairly easy to do

[cs2000]

Same. Ive managed it 3 times now with removing the 6 plastic clips ontop of the bumper, remove the 3 screws in each where arch and then 2 screws on either side underneath the bumper, this allows you to flex the bumper enough to unscrew the reflectors.

[Adrian@TORQEN]

How about this mod?

 

http://www.the370z.com/diy-section-do-yourself/6101-diy-headlight-leds-blackout.html

[cs2000]

Haha, having done that a couple of times on my Celica, I NEVER want to do it again. The end result was great, but the hassle isn't worth it, plus I could never get one of the lights sealed again properly.

[-H-]

Could I order a set of these in black please?

[cs2000]

Of course, il get the reflectors ordered first thing tomorrow

[RDON]

are you planning to do these for the facelift reflectors?

[cs2000]

Possibly at some point. I couldn't find a supplier of the reflector units that were priced well. As in, less than £20.00. Cheapest I could find was about £45.

[Munton87]

Could I order some of these silver ones please ????

[cs2000]

Not a problem mate, il add you to the list and order the parts, PM incoming too.