sketch Posted October 27, 2009 Posted October 27, 2009 looks like an awsome porject, wish i had the fundage to do this, definatly be keeping an eye on this thread Quote
djtimo Posted November 19, 2009 Author Posted November 19, 2009 Small update! For the full thread go to (with out the spaces in the forum name) http://forums.n i s s a n s p o r t z.com//index.php?showtopic=23775 A big box came today Sorry for the amount of pic's but i want a few good ones as ill never (hopfully ) see these parts again when the engine is built! Pic's. 1. 2. 3. Just a bit stronger than the stock ones! Eagle rods are rated to 150HP per rod, the stock ones tend to fail at anything over 70HP per rod!! 4. 5. A little bit of an arty B&W one! lol.. 6. 7. 8. 9. 10. 11. The CP piston's are a work of art. They look far to nice to be deep inside the motor! 12. 13. 14. 15. 16. 17. 18. 19. 20. Last one is the forged wrist pin that comes with the pistons. With all the ARP bolts and forged parts I may rev the motor higher if its still making power at the redline? May be rev it to 7-7.5RPM? Not sure yet. 21. Quote
R35LEE Posted November 19, 2009 Posted November 19, 2009 Very good work I can't wait to see this project come together Quote
djtimo Posted February 17, 2010 Author Posted February 17, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. Quote
djtimo Posted March 5, 2010 Author Posted March 5, 2010 Bump, For progress!!! Check the link in the first post for shiny goodness! Quote
andlid Posted March 5, 2010 Posted March 5, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. Quote
djtimo Posted March 5, 2010 Author Posted March 5, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. I know mate, I did not think that was "abusing" the link censoring ban lift, It just makes it easier for people to click the link in the post rather than going back to the 1st post? I don't keep this thread as up to date as the NS one so its easy for people to check on the progress over at NS. Quote
Husky Posted March 11, 2010 Posted March 11, 2010 can you post them here? (my comps not playing ball with a fair few sites right now) Quote
djtimo Posted March 11, 2010 Author Posted March 11, 2010 Here's a few mate! Update! The big day is getting closer guys! Some more pic's Tony has sent through! Im taking a trip down to Abbey tomorrow to see big Tony so im sure ill have a few more pic's to share tomorrow night Modified APS sump with AN fittings for custom oil returns. Tim. Quote
Husky Posted March 11, 2010 Posted March 11, 2010 that does look ace! why nissan cant get their act together and produce the car like that in the first place i dont know :lol: top job Quote
Ian Posted March 11, 2010 Posted March 11, 2010 Tim, how easy are the valve covers to remove? Tempted to pick up a spare set & do them in a wrinkle black effect Quote
M13KYF Posted March 12, 2010 Posted March 12, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. we haven't removed any links since the ban was lifted. The original post would of automatically lifted the link when you posted it. Taking the ban off will not put the link back in . So less of the blatant abuse of link censoring attitude and a apology would be nice Quote
djtimo Posted March 12, 2010 Author Posted March 12, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. we haven't removed any links since the ban was lifted. The original post would of automatically lifted the link when you posted it. Taking the ban off will not put the link back in . So less of the blatant abuse of link censoring attitude and a apology would be nice People need to get the **** off their high horse. Im sick of this crap, were all love cars and use the forums to chat about them. I don't care about the link and no one will be getting an apology of me! Quote
H5 Posted March 12, 2010 Posted March 12, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. we haven't removed any links since the ban was lifted. The original post would of automatically lifted the link when you posted it. Taking the ban off will not put the link back in . So less of the blatant abuse of link censoring attitude and a apology would be nice People need to get the **** off their high horse. Im sick of this crap, were all love cars and use the forums to chat about them. I don't care about the link and no one will be getting an apology of me! Tim, what's this all about?? The link was put up before the censoring was lifted as Mike said. So you have jumped the gun a bit with an accusation that is false. That tends to warrant an apology. Nobody is on a high horse as you well know. Quote
martinmac Posted March 12, 2010 Posted March 12, 2010 If you accuse someone of doing something that they havent done its usual to say sorry. Quote
Sarnie Posted March 12, 2010 Posted March 12, 2010 How hard is it to just cut and paste whatever you post on NS directly onto here? No drama then.............. Quote
Beavis Posted March 13, 2010 Posted March 13, 2010 Yet another member who thinks he is above an apology Quote
M13KYF Posted March 13, 2010 Posted March 13, 2010 Admin Note: Just quoting a previous post and providing a link off site is blatantly abusing the lifting of the link censoring. we haven't removed any links since the ban was lifted. The original post would of automatically lifted the link when you posted it. Taking the ban off will not put the link back in . So less of the blatant abuse of link censoring attitude and a apology would be nice People need to get the **** off their high horse. Im sick of this crap, were all love cars and use the forums to chat about them. I don't care about the link and no one will be getting an apology of me! Tim, it was you on your high horse and not me. It was you dishing out the crap about censoring which wasn't correct. So I would be thinking about apologising. We just paid for your JDM allstars ticket and this is what we get in return You're out of order Quote
RichIOW Posted May 28, 2010 Posted May 28, 2010 Any news on this project? The pics so far look amazing. Quote
djtimo Posted September 1, 2010 Author Posted September 1, 2010 A few updates on this now guys. Check the link in the first post for details! Quote
djtimo Posted September 3, 2010 Author Posted September 3, 2010 Few vid's with the new exhaust. Some pic's and detail in my NS thread. Not very good vid's but you get the point. Exhaust is loud to say the least! :blush2: The vid's are off my iphone and dont really show the pop's/backfires to well and sorry for the clicking noise the phone was wedged in the pax head rest lol. Its going to be too loud when the boost is doubled and the rev limit is 6.6K instead of the 4.7k I have at the moment! lol Oh and watch them in HD the sound is better! o_Pg2RM63Z0 I20BL_tp__E rynnhGKn4sw Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.