Jump to content

Renegade

Members
  • Posts

    538
  • Joined

  • Last visited

Everything posted by Renegade

  1. Great guide. I have just done mine it took around 50 minutes. My window was stuck at the top I put a new motor in instead of brushes. The only thing I can add is that I also saw this guide too. http://my350z.com/forum/maintenance-and-repair/361241-how-to-repair-stuck-broken-window-motor.html Taping the window meant no messing around with getting the glass right. No idea what would happen if the window was down
  2. If he is Gas Safe registered report him to them.He has left a gas appliance in a dangerous condition. Even though it is a water leak. http://www.gassaferegister.co.uk/help/make_a_complaint.aspx
  3. I ordered the dreaded passenger window motor on Thursday, it arrived Friday at 10am Great service. Thanks. I just found some sweets in the bag Thanks
  4. The belt probably just wants adjusting,if it is in good condition. Its is an easy job to do.
  5. UV protection I never bother. I only really need to clean the lights once a year. The meguiars paint cleaner is only lightly abrasive if at all. Then I just wax the headlights while I do the rest of the car. As others have said just go polish them, they soon clean.
  6. Meguiars paint cleaner is all I ever use, it soon cleans off. T cut probably works too.
  7. I bought one of these last week. http://www.ebay.co.u...=item3f2c79b08d It does fit the 350 .
  8. Thanks Good thinking I will go take one out.
  9. Changing the plugs,I dropped and lost 2 of the small bolts that hold the coil packs, wiring loom brackets. Ones I ordered from ebay, you could probably assemble Sydney Harbour bridge with.
  10. Nissan VQ engine used by Renault. http://en.wikipedia.org/wiki/Nissan_VQ_engine
  11. Just one of these as mine snapped in the middle. You can get a black one or use tape http://www.amazon.co.uk/BLOCK-CONNECTOR-STRIP-jointing-cable/dp/B003ZWE7HW
  12. I fixed mine with a small electrical block connector .
  13. glad to hear he is still looking after you Yes he is, and doing a great job as always.
  14. My car has just been for a service at Mikey's brothers garage. Ritch spotted a corroded hole in the sump which has just started to leak through. It might be worth having a quick look at yours.
  15. These are around £200 new. Most old / second hand ones will be rotten too.
  16. See if this helps. http://www.350z-uk.com/topic/56633-how-to-repaint-interior-door-trimmirror-switch/page__hl__plastikote#entry839492
  17. On passenger side, chrome trim just pops off. There are 2 bolts behind they are quite far in. I would imagine drivers side is similar. This is for an 04.
  18. One of our members cars was on there a few years back, Quick google found it http://www.barryboys.net/phpBB2/viewtopic.php?f=1&t=33235&start=0
  19. Ask R35Lee if he has one, http://www.350z-uk.com/user/10571-r35lee/
  20. Over £400 for backbox, £180 for middle section.
  21. That was last year. I did get a set of DBA all round from Alex
  22. Hi In response to your email for front and rear discs 350z Front £221.99 each + vat Rear £221.99 each + vat Many Thanks ______________________ ******** ********** Parts Advisor Harratts Sheffield Nissan
  23. Quite normal Just leave the aircon on. Make sure that climate is set to air from outside, and not recirculating. Recirculating really steams it up.
  24. Easy fix http://www.350z-uk.com/index.php?showtopic=3047
×
×
  • Create New...