Renegade
-
Posts
538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Renegade
-
Mine fell off and were removed due to rust .Went through MOT no bother, I don't think none OEM cats have heat shields.
-
Looks like it's all gone.
-
From Camskills. £20 plus £7 postage I ordered a pot http://www.camskill...._Wax_Kit_-_3pc_
-
After 7 years of owning my 350 it was time for a change, so I bought this Like others have done I also opted for the Auto. IMGP0755_zpsjovofw9g.jpg.html]
-
Cooling fan slowing down and stopping ?
-
Mine is 90psi on start up and will go to 120 when driving from cold for a very short while. Once warm it is around 60 to 70 when driving and around 40 on idle. Yes the dipstick is pretty poor.
-
http://www.350z-uk.com/topic/49789-howto-removereplace-exterior-drivers-door-handle/
-
I think my replacement sump was around £130 new. Mikeys brother got it for me
-
Looks like it is coming from the drain plug.
-
Apple will charge around £150 and just swap you the whole unit, for a reconditioned one.
-
Never heard of an EVAP canister before I had to Google it. I guess i have one too
-
If you mean the green moss that grows on the window seals I wipe it off with a wet cloth.
-
Definitely has the dark colour wheels. Nice car but scuff damage on door, and bumper, looked like it had been washed with a brillo pad too.
-
OK Thanks For some reason I thought Black Rose was only available on the GT edition.
-
Should it have GT stripes down the side ? One I looked at recently did not. It was a November 2011 model.
-
As CS says there is no dust at all. They work well.I find the rears make a small clunk when you roll back which OEM tend not to. But I have used EBC pads for years. Now on my 2nd set from CS.
-
PDF format http://www.courtesyparts.com/owners-manuals.php
-
Not mine no http://www.ebay.co.uk/itm/Nissan-350Z-Volks-Rays-GTS-Alloys-19-Inch-/121576574219?pt=LH_DefaultDomain_3&hash=item1c4e874d0b
-
If that is a picture of the actual arms you had fitted,it looks like new cones are on. -
The outcome of this was. I sent it back on Monday at the buyers expense, I got a refund a little while back
-
£279 at Argos with no games.
-
Its sat on a sheet of perspex on top of the tumble dryer. Rest of the wheel sits flat you can see the gap under the wavy lip.
-
I used the tape as a guide,over an area of around 200mm there is a 5mm narrowing. If you look at the outer and inner lip beneath the tape you can see it closing in. Plus the outer lip that usually gets scraped has been hammered and filed flat, and is very uneven. Seller has accepted it back.
-
I bought a rear alloy from ebay so I could get my rear wheel painted as it is getting the usual bubbles. The advert stated. Alloy is without any buckles. I have already requested a return What do you guys think is it bent ? I have never seen a 350 rear damaged before.
-
Loud knocking from the rear think is the wheel bearing!!!!
Renegade replied to Little74's topic in 350Z Technical
My knocking from the rear, turned out to be a front drop link
