ZMANALEX

I run mine from the top rad. hose.

Any good deals going at the min I need front and rear Pads You have pm

http://www.pistonheads.com/news/default ... ryId=21236

Sorry mate I can not answer your question because there are to many variables and it is hypothectical. I have already given you my own personal view based on my own personal experiences

Best to replace at time of clutch change as a matter of good engineering practice. The dual mass fly is notorious for failure and the fitting of the single mass will give you noticable extra performance due to the change in weight and inertia. Well worth doing. Or you can change the clutch now and wait until the dual mass fails, say perhaps in another 10,000 miles and pay for the job to be done all over again. Alex.

Maybe you are wrong However, if you need to swop out your fly and you don't fancy a single mass fly then I have a available NEW Genuine OEM dual mass flys at only £295.00 Over £1000.00 from Nissan but why am i wrong? i know its generally accepted here that when you change the clutch you change the flywheel, but when it comes to me shelling out money i just want to know why? my car has done 30k miles like many others, the clutch is on its way out. surely the OEM DMF will last far longer? how many peoples have actually gone and at what mileage. i ask as i want to know if its worth doing. Never said that you were wrong However it is worth doing

Maybe you are wrong However, if you need to swop out your fly and you don't fancy a single mass fly then I have a available NEW Genuine OEM dual mass flys at only £295.00 Over £1000.00 from Nissan

You have answered your own question They are both good brands of tyres but mixing is not advised with the Zed. Alex.

What brand of tyres you running? What tyre pressures you running? Alex.

I have sold hundreds of The Fidanza Flys and Exedy stock clutch kits without one single complaint. If the fly is fitted as per the manufacturer's fiitting instructions then you will not experience any vibration. What you may be experiencing is if you labour the car, say driving at 30mph in 5th or 6th gear then you will get a roughness through the car. This is a characteristic of the single mass fly because the inertia has now totally changed and there is no damping from the single mass fly. A slight change in driving style will quickly resolve this issue. The extra transmission noise that you are experiencing up to around 2000rpm is just the gearbox idler gear, again caused by lack of damping from the single mass fly and does not pose a premature wear problem. Both these issues are characteristic of the single mass fly. This is a normal effect that is well worth the added performance. The difficulty that you experienced with the shift between 5th and 6th would only have required the shift gate plate to be adjusted. If you are experiencing a genuine vibration, which could be caused by a badly fitted flywheel and excessive flywheel run-out is evidence of an improper fit, then I would suggest that you take the car back to the garage that fitted the clutch and perhaps also make the people who sold you the kit aware of your issues. Hope this helps. Alex.

Hi and welcome to the forum.

I can help you with this mate if the other guys can not get you sorted but I would not be able to ship until Monday with an eta of Tuesday. Rear box and centre pipe, 18.000 miles. Drop me a pm if you want it. Cheers, Alex.

Hi and welcome to the forum

Yes I have them, how many would you like problem is I can't remeber if they are finished in Gunmetal or Blade. I will check tomoz. Now any one for washer jets (Finished in Black Only)

Dave, I have black aluminium bumper mesh arriving in the next few days if you are not sorted. The throttle body spacer from Adam works well mate so no worries there.

I have a selection of tasty seats available. Send me over your email addy and I will send you over some pictures. Alex.

Form an orderly queue please. Right, so what do you guys require? Is it the colour coded headlight washer jet square shaped covers or is it the actual washer jets.? Alex.

Hi and welcome to the forum.

Hi Kempie and welcome to the forum. Good luck with the build. Alex.

I can help you with the washer jet mate.

Chris, I can help you with the light unit. Kettle on. Alex.

I have one mate pm if I can help you further. Next Day shipping. Alex.

http://www.pistonheads.com/news/default ... ryId=21209

Technical Service Bulletin

Could be anything mate. In this instance I would be inclined to follow Nissan's advice and let the fault develope.