ZMANALEX

Garages don't want to mess with stuff like this. Today's technicians probably don't even know how to light up an oxy/accy gun never mind how to use it. Also there is the health and safety issue trying to heat this up in place. It is not uncommon to have to heat the surrounding area to remove the rear sensor and yes sometimes the female thread does gets damaged but nothing a tap wont fix. I usually carry out the heat and remove procedure in place but I have occasionally removed the cat to facilitate sensor removal if problematic. Worst case scenario is a new cat would be required (front pipe) No need to go to Nissan and Pay £1000.00 for the cat as I have a few low mileage ones in stock and all good to go. Another upgrade that you should consider is fitting the o2 sensor spacers which would mean that you would never have the same issues in the future. Again I have these in stock, CNC manufactured from stainless steel here in rural Perthshire. £30.00 a pair. Alex.

I answered the very same questions in your post in August Have you forgotten already

Can you not put details on here for everyone? What colour and code is it? Behave

I have a new set that came in yesterday and are surplus to requirments. Genuine Nissan, still boxed. £100.00 Alex.

Nope. the pistons are £40.97 + vat each. Next Question

If you are referring to item number 41121 and 41121+A then they are £49.66 +vat each and you will require 4.

Full preowned JDM kits available, next day shipping. You have pm. Alex.

Darren, You will not find these on the Brembo web site and you will also not be able to buy these direct from Brembo as they are on licence to Nissan. Have a look at the image below and let me know exactly what parts you require as I have access to them and also let me know what your problem was with Nissan in identifying these parts. Be warned these parts are very, very expensive. Alex.

The part number in the U.K. will be different from the states.

Cool Trainers

As Mike has confirmed I am indeed the chappy that does the fix kits. In stock and good to go. Alex.

Hi and welcome to the forum Eddie.

You are safe to go on your trip Justin as nothing will fall off or cause further damage if you are experiencing the clicky rear axle issue. Alex.

Love it:

There are two handbrake adjusters: One is through the hole in the face of the disc which lets off the handbrake shoes and the other is for the cable which is inside the car. If you remove the ash tray you will see the adjusting nut on the end of the cable. A long socket will be required. Alex.

Because I was only 50 meters behind the car that dropped the fluid and it just happened immediately in front of me. unlucky or what.

I have all types to suit all pockets. PM me if I can help further. Alex.

I have a spare stock under tray which is in as new condition £30.00 shipped

I can help you with this mate as I have 4 in stock. You have PM. Cheers, Alex.

Hi mate, I have new and used Brembo discs available at a fraction of Nissan dealer prices. Also got Brembo pads, Ferodo Premier or Ferodo DS2500 all available. PM me if you want any further help and if you wish to go the Brembo route.

Sandy, PM Derek ( ddmroadster350z ) Alex.

Hi and Welcome to the forum.

Hi Alex, Never received nothing, thought you had forgot so i went to Nissan because i needed the car this weekend. 2 bolts sent off same day to the address that you provided mate.

So were the bolts that I sent you no good then ? Alex.

I am sure that there are, it sounded like 20 machine guns had all gone off at once and the inside of the car is covered in gravel and chuckies.