Markus22

Hi, Just got a orange warning light up on the dash ,looks like a engine shaped thing bottom left of left clock.what is it and what could be the problem thanks Mark

Hi, Just replaced my rear boot struts with ones from SGS easiest job iv'e ever done works a treat,just tell them what spoiler you have and they send some new ones to suit .best £60 iv'e spent. Mark

Hi, Replaced my rears just over 2 months ago got rid of the Teflon Dunlops and replaced them with Avon ZZ3 and they are fantastic tyres and cheep as well. Mark

Hi, thanks for that but don't seem to have a problem with the original ? it seems to clear ok

Hi, Will the summit strut brace clear the engine and bonnet with a spacer fitted. Thanks Mark

Chesterfield looks just like my APS

Hi, Been looking at the dealers on here and i see that MW Tech Racing sells hub concentric spacers with flush fitting nuts ?that saves fitting longer bolts ,this would enable a BBK or indeed a standard brembo kit to fit. but how close can i get to the wings with the tyres so they do not catch.245/40/20 fitted? on the front. mark

Hi , Thanks for the offer Paul if i knew that they would fit behind the wheels,Lowenhart LD5's i'd snatch them up I'd have to try to fit them on a standard brembo set up to see any body live near Sheffield so i can try.nice wheels by the way. The disks are Turbogroves but as i said the inner side of the disks are a lot more worn than the outer and appear to be sticking by the colour of them so i assume that the callipers are Kaput so new disks would not really help? can the jdm callipers be repaired Thanks Mark

Hi, Thanks for the input ,the rears have about 25mm of clearance for some reason even though they have bigger dish,getting rid of the wheels is not a viable option really as i would still have crap brakes .

1

Hi, My jdm has crap brakes the front disks do not wear even? the insides more than the out and they judder like mad there knackered So i decided to have fitted a BBK [K sport 330mm 8 pot]problem is the brakes fit the car but the wheels will not fit on[20in 3 piece ] :bangin:they would need 15-20mm spacers to be made to fit but then would not go under the arches. as BBK calipers all appear to be bigger were do i go from here? are standard uk brembos bigger than JDM callipers? particularly in width which is the problem,are brembo disks the same thickness.Don't want to change wheels Help is much appreciated

Hi, This must be a general problem ,I thought that it was just me mine was unbearable in summer ,never had the heater on in summer ,so iv'e just had the exhaust wrapped and it's a big improvement and it cuts the drone inside fron the APS system.

Hi, I had my remap done at RS in March my results went from 277.5 to 300.8bhp and about 27lbs ,total changed the car ran like a sick pig before now it's so eager to go and the mpg has improved.having the brakes done there this week. Mark

Hi, Glad that you like the VXR8 I have the occasional access to a VXR Monaro i too find them fantastic cars the build quality as you say is so much better,better fuel economy etc,very little to match them on a standing start except for ugly little jap rockets or is that skips. when it's time for the Z to go i'll have my sons might keep the Z as well who knows. If you don't like Black get it wrapped my son is having his done in July white. Mark

Hi. Any more info on these yet. Mark