ZMANALEX

Doubt if you will get it to move unless you have really been supping the porridge. Alex

How much for a set of 25s for the rear sir? Hoy You

Brembo and DBA Rotors (discs) in stock: Brembo and Ferodo Pads in stock: Drop me a PM if I can help you further Niko viewtopic.php?f=157&t=58518 viewtopic.php?f=157&t=50717 viewtopic.php?f=157&t=55106 viewtopic.php?f=157&t=55107 viewtopic.php?f=157&t=27438 All the above stuff and much more can be found in my 9 page sub-forum: viewforum.php?f=157 All in stock and good to go same/next day Alex

Eibach hubcentric spacers in stock and good to go same/next day viewtopic.php?f=157&t=42415 Alex

Thanks for the referrals guys PM received and replied to Dan Alex

Eibach sway bars are are great upgrade, however the sways and links will really have little effect on low speed straights. Same with compression rods even if the ball joint or bush is worn, unless the bush has fallen out which would also give you a loud knock on uneven surfaces. First thing that I would be looking at is your tyres mate, however I am struggling to see how you can have the issues that you have described whilst travelling in a straight line at 30 mph.

Cood bee yoor powr steern fluid loe or tire presur loe

They tried this a few years back and it never caught on as most, including myself found that the cambers were all "wrong" and there was insufficient run off areas where it mattered which did not inspire confidence, however thay have now addressed the run off issues with some major work having taken place during the close season. Cambers remain the same. The KRC reverse circuit is extremely demanding and expect your lap times to be down by circa 6 secs. Alex

When the oil light comes on it is to late I am afraid. Alex

OEM airbox with Cosworth or HKS Performnace panel filters Alex

HKS and Cosworth in stock and good to go same/next day:#1: Check out my sub forum viewforum.php?f=157 Alex

Coincidence, nothing to do with exhaust. As Dan has said get some proper oil in it NOW. Alex

Nismo style N1 rear wings in stock Good quality and great fit Alex

Rear LED lights available here viewtopic.php?f=157&t=13464

Chris, I would wrap all exhaust stuff that is close to the clutch lines and tube. I would also wrap the clutch lines and hose. I would also recommend that you swop out the concentric tube as well as the concentric slave. viewtopic.php?f=157&t=57096 viewtopic.php?f=157&t=57094 Both these parts are in stock and good to go same/next day mate Alex

It is T3 that you have Sam You can purchase a decent hand held laser temperature tool for circa £50.00

Pm received and replied to Amy: Thanks for the referrals guys

I monitor mine on the Z but not the 35. Alex

If it is a coupe that you have then the most economical way is to simply fit a bolt on horizontal harness bar. If you have a Roadster then not so economical or easy. Alex

Hi and to the forum Glenn PM received and replied to Alex

Amy, I stock Genuine Nissan Auto Transmision fluid. Nissan say that it is an oil for life and does not require changing, however I have done quite a few Auto. Tranmission fluid changes recently and have supplied quite a few forum members with the same oil. Alex.

5W30 fully synth is what Nissan recommend for the VQ35DE

Genuine Nissan OEM dual mass flywheels in stock and good to go same/next day if required Also single mass aluminium lightened flywheels also in stock and good to go same/next day. Drop me a PM if I can help you further mate Alex

We all did as well mate

Despite what is written above, and drawing on my own experiences and after in depth consultatuion with Denso, I have found that the Denso Iridium 0.4mm plug lasts as long as the 0.7mm plug and have experienced no issues or failures within 54,000 miles on either plug on the hundreds of sets that I have sold or fitted. I would replace any Denso Iridium plug for free that fails within that period without question on any N/A engine. Alex