ZMANALEX

To test the temp gauge simply take the temp sender wire to ground and see if the needle on the gauge moves. Afterwards recheck all related fuses and relays. Alex.

Steve, There are 2 live and 2 earth mate. Also remember that they are twin speed. You will not do any harm if connected up wrongly for a split second. Alex.

Steve, To test you can take a direct feed and earth to the fan motors. The motors can be stripped and cleaned or you can simply just purchase replacements. Here are a couple of options for you. Both in stock and good to go same/next day. http://www.350z-uk.com/topic/66473-350z-mishimoto-performance-fan-shrouds-18000/ http://www.350z-uk.com/topic/46683-radiator-coolant-fan-motors-now-in-stock/ Just give me a shout if I can help you further. Alex.

What parts is he replacing ? Alex.

Plenty in stock mate. Just drop me a PM if I can help further. Alex.

It is a 3 - 4 hour job to swop out the concentric slave and clutch kit on a HR 350. I good indy will do this job for £200.00 labour. Alex

It is the rear suspension turrets that require reinforcing for a true coil over set up. Alex.

Preowned gearboxes and new lightened flywheels are in stock if required. Just drop me a PM if I can help you further. Alex.

PM received and replied to Steve. Windscreen washer pumps etc shipped to you this morning. Alex.

Noise reduction anti squeal shims in stock for the Brembo pads and good to go same/next day. Alex.

Bit late, but here's a 4 seater for you Stan which would have been ideal for you and the family. http://www.350z-uk.com/topic/72917-sold-my-r35-gt-r-is-for-sale-sold/ Good to hear from you mate, and hope all is good. Alex.

You can get them now !!!!! Alex.

As before, new and preowned in stock. Just drop me a PM if I can help you further. Alex.

New and preowned in stock at the moment. What colour/paint code do you require? Alex.

You should have bought from me as you are guaranteed the correct parts and they would have been cheaper. The oil filter that you have been given is listed for a Micra. It is also the filter now listed for the 350Z.. Alex.

Dave, This is what Nissan recommend mate: http://www.350z-uk.com/topic/54914-coolant-pre-mix-fluid-genuine-nissan/ Alex.

Nice one BM. As well as a few plastic fixings this is what you will require: Plenty in stock so just drop me a PM if I can help further. http://www.350z-uk.com/topic/54906-undertray-clipnut-and-bolt-fixing-kit/ http://www.350z-uk.com/topic/54905-undertray-fixing-bolts/ http://www.350z-uk.com/topic/54904-undertray-clips-nuts/ Alex.

Remember that headlamp washer jets are an MOT requirement. Alex.

:lol: Your current injectors will be fine James. Alex

Nice one 14N. PM received and replied to lewisdavid_ Plenty new and preowned in stock and good to go same/next day. Alex.

It will be your clutch slave cyl. Please refer to my post above. A new slave, braided line and some new fluid will fix your issue. All in stock and good to go same/next day Just drop me a PM if I can help you further. Alex.

I can just picture you Niki, :teeth: :drive1 Glad that you are well happy. Alex.

Yeah, I can do pics for you mate no problem, but a bit pointless as they could do with a refurb. I will try and get them over to you sometime during the weekend. Regards, Alex.

These any good to you James? http://www.350z-uk.com/topic/72479-18-rays-with-falken-452s/ Alex.

This is a genuine request from ho02pey90 to reach Bhavin85 so any help would be appreciated. Thanks, Alex.