ZMANALEX

Very straight forward to a properly trained glass fitting technician who has an eye for detail. Alex.

Ollie, Best to get a new tap the correct size and just carefully retap the threads. If that fails then a helicoil will work if fitted properly. Do not go oversize as you will have a problem sourcing the correct bolts and you would have to machine out the upright caliper fixing holes which is not a good idea. Stock OEM front and rear caliper bolts are in stock if required. Alex.

If any preowned come into stock within the next few days I will give you a shout Sam. Have you checked in the "FOR SALE" forum as I saw a set of Eibach springs and shocks for sale in ther earlier this week.? Alex.

Fresh out of preowned at the moment, however new Eibach spacers and Eibach springs are in stock and good to go same/next day. Just drop me a PM Sam if I can help you further mate. Alex.

Hi Rod, Genuine Nissan new and preowned CPS are in stock and good to go same/next day. You have PM mate. Alex.

Welcome along

Not suitable for 350Z VQ35DE Alex.

Welcome to the forum

Unfortunately if it is the compression rod ball joint then you will have to replace the complete arm. Yes the SP bushings can be reused if you can remove and reinstall them without damaging them, however I would be tempted to just fit the new compression rod which comes with a new OEM bushing already fitted. Alex.

Daryl, You will have to systematically check over the suspension which should only take around 15 mins to eliminate all other possibilities. However more than likely you will end back at the compression rod ball joint. All front and rear suspension parts are in stock and good to go same/next day if required. Alex.

P1 and P2 are similar and are basically just an oil and filter change. P3 is the big service. Alex.

P3 for peace of mind due to age and mileage of car. P1, P2 and P3 service kits are in stock and good to go same/next day. Alex.

Big job to do properly and only worth doing if already stripped for other work. Alex.

English is not Neil's first language either :lol: Alex.

I would not dream of taking any form of payment for advice Luke; If he did not remove the gear lever from within the car (which is the correct and easiest method) then he must have removed the bridal from the gearbox from underneath which is held on with 4 bolts. He also would have had to remove the bolt and nut which connects the gear lever to the gearbox linkage. On assembly, I just can not figure how he could go wrong, unless he has lost the bush/bushes from the base of the gear lever where it joins the linkage. i will dig out a few schematics for you and post up. Alex.

He has not contacted me today thank God: :lol: Don't know how he managed to get the gearbox out without removing the gear lever, however every day is a school day. Unless he removed the complete bridal assembly: Alex.

Surprised to see this post Luke. Did you not take it back to your "mechanic" to get the gear lever plate readjusted to its original position? As fully explained in previous PM this will be the issue unless he has really messed up. Alex.

Best to remove the rear wheel to inspect the pad thickness Ollie. Alex.

Welcome along

Hi Graeme, Is your car a UK car or a JDM import ? Was the cut an rpm cut or a mph cut ? Any EML showing ? Also all P1, P2 and P3 servicing kits in stock if required. Alex.

I am no expert however I can only guess that you have a permanent live feed. Have you checked the feed with a meter to determine if this is the case ? Where, as you know you only want a live feed when in reverse. Alex.

PM received and replied to: Alex.

Only the rear can be adjusted without aftermarket correction arms. There are snail cams on the rear subframe for toe and camber adjustment. There is no adjustment on the front with the OEM arms. Correction arms front and rear are in stock and good to go same/next day if required. Just drop me a PM if I can be of further help. Alex.

Ditto Will: Providing there is not a leak then it will simply be a case of brake pads badly worn: Options of quality brake pads and proper brake fluids always in stock and good to go same/next day Alex.