Jump to content

ZMANALEX

Members
  • Posts

    15,066
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. The old ones are always the best.
  2. :lol: First sensible post you have made on this forum:
  3. Afraid unrealistic and not possible my friend.
  4. to the forum.
  5. to the forum.
  6. http://www.driftworks.com/shallow-open-ended-wheel-nuts-m12-x-1-25-nissan-etc.html
  7. PM received and replied to. All parts are in stock and good to go same/next day.
  8. to the forum
  9. Use this and the crank pulley bolt will fly off:
  10. ZMANALEX

    Pending MOT

    PM received and replied to.
  11. Bank 1 is R/H driver's side. Sensor 1 is up stream in the exhaust manifold. The front sensors are not handed Remember that you have Narrow band 4 wire and Wide band 5 wire.
  12. That is the link rod to your headlight levelling unit. In stock and good to go same/next day. Drop me a PM if I can help further. Alex.
  13. Refer to my post #2 and read this http://www.autocodes.com/p0420_nissan.html
  14. http://www.autocodes.com/p0300_nissan.html
  15. http://www.autocodes.com/p2a03.html
  16. Plenty OEM front and rear springs in stock. Just drop me a PM if I can help further. Alex.
  17. Box out for the HR I am afraid.
  18. When they fail you get little warning as the seal burst and the pedal falls to the floor and you are literally stranded unless you have the skills to start the car, get it in gear, change gears and get home or to a garage with out a clutch. The OEM CSC will fail again, however if you have an upgraded CSC fitted then you should be fine.
  19. As above, get a few quotes for a repair and ask the neighbour to pay. You do not want a new quarter panel: trust me.
  20. to the forum, refreshing to read of your dealer experience.
  21. L & G are top drawer.
  22. What ?
  23. I previously dismantled a 350 and a G35 Skyline, both on oem 17" with Brembos, but I can not remember if they had spacers fitted. However, Rays and Brembo calipers and discs in stock if you decide to go that route. Just drop me a PM if I can help further. Alex.
×
×
  • Create New...