Coz@TORQEN

@Adrian@TORQEN Company Car? You can pay for petrol too with that size engine...

Hi, Diagram of the windshield washer system available here: https://nissan.7zap.com/en/er/z/z33/5+701+65535/e/289/ Should give you a basic idea of where all of the pipework runs so you can check for leaks. As you said, it's worth checking the nozzles too but would be a bit of a coincidence for both to give up at the exact same time.

Our pleasure, anytime!

Hello and Welcome Steve, I see you're finally on the forums! Glad you're pleased with the wing we supplied

Nissan UK or Nissan in general? We can ask in Japan for you but it would have to come by sea due to sizing so minimum 8-12 weeks if they have stock.

Super greasy, I had a similar experience 2/3 days ago, wasn't expecting it at all.

Hi Nick, car looks good, well done for resurrecting it. We have the Stoptech braided lines in stock if you're looking for some: https://www.torqen.uk/nissan/350z/brakes/hoses-lines/2813-350z-stoptech-stainless-steel-brake-lines-front-and-rear-95042004-95042503.html

Hello and welcome!

Should show on this diagram instead: https://nissan.7zap.com/en/er/z/z33/1+509+701/c/213/ Looks like it's part number '14053-AM80A' We have it listed here if that is the one you're looking for: https://www.torqen.uk/nissan/350z/cooling/oil-coolers/23568-350z-de-nissan-oem-oil-cooler-hard-pipe-front-lh-14053-am80a.html (Not in stock but most likely 1-2 weeks or so to get one here).

Hello and Welcome!

You can always get them later and swap them depending on the day Monday-Friday = Polished and then for the weekend, change them to Carbon... like a different pair of socks for every occasion Jokes aside, thanks for your order! My colleague is packing them up as we speak.

Hello and welcome, This might help, if it's slightly above the H it has been overfilled and you'd be best draining out a small amount just to be on the safe side. It shouldn't cause any issues being slightly overfilled but better safe than sorry IMHO.

Hi, Not sure in terms of using the US style key fobs, I suspect it would be absolutely fine. You can find the programming instructions here if you do decide to try it, this should be the programming procedure for it:

Hello and Welcome!

Hi, This should be the Hitachi alternative: https://www.torqen.uk/nissan/350z/engine/electronics/40064-350z-de-z33-hitachi-oem-replacement-camshaft-sensor-rh-driver-intake-lh-passenger-exhaust-cps0008.html Part number: CPS0008

Hello and welcome back!

Hi Steve, As above, Quaife or OS Giken would be your go to. We're a UK Distributor for both brands and are more than happy to assist with getting one in for you. Feel free to drop me a PM.

Hello and welcome to the club!

Did you replace the steering angle sensor/clockspring assembly as a whole with a genuine Nissan Part? Symptoms of it failing include the steering wheel controls as well as the horn. Any traction issues when turning the wheel? We can supply a replacement if you've not gone down this route yet, I suspect this is the cause of your issue. Feel free to drop me a PM if we can help, we'd need your VIN to confirm part number with Nissan as they vary. Similar issue here (resolved through replacement clockspring): https://www.350z-uk.com/topic/110674-espvdctraction-control-fault/

I'll have a chat with some of our regular carbon suppliers, not something I've seen before but we may be able to get hold of some or get some made.

Hi, Not sure if this will help but the schematics for the seats can be found here: https://nissan.7zap.com/en/er/z/z33/5+701+65535/l/870/ I assume it's for electric seats or heated seats as you said.

You'll be missed, Sir!

As mentioned above, it looks like only the securing pin/clip and full cap assembly can be purchased, not the strap seperately. https://nissan.7zap.com/en/er/z/z33/5+701+65535/b/172/#17429_A If you do end up purchasing a full cap, we have them listed here: https://www.torqen.uk/nissan/350z/engine/dampeners-mounts/39221-350z-de-z33-nissan-oem-cap-assy-filler-2003-17251-79980.html?search_query=17251-799&results=2 They're in stock so we can ship one out straight away.

I responded to your email

Hello and welcome, Sir!