taybo

Are these things ever run honestly?

Dude you're going for it! Let me know how you get on. Keyser's options 2 and 3 sound better to me. Just bare in mind wiring colours can be different in a HR to a DE.

Yeah you too. We didn't get in for food as there were masses of people queuing. Never expected to see that kind of turn out! Had a walk round but didn't see you again so we went to find bacon up the A303. Several GT-R's and one yellow GT4 out the front. Hopefully catch you again sometime.

Still on for Sunday 9am at Haynes Motor Museum car park if anyone fancies a meet up :-)

A couple of us are going to this next Sunday (4th Feb). Anyone else fancy popping along?

Bodger block?

Hey there are a couple of zeds in Chard area! It took me 3 attempts to get mine working properly. Didn't blow anything up and nobody died!

No step by step instructions. Most of the wires you need to cut into are on the too plugs under the mirror switches. The only awkward one is located behind the door speak (purple wire). Have a look higher up on this page for some more info/pics. Wire colours may differ depending on whether you have a DE or Rev-up/HR. If you need a hand I'm not very far way if you're in Taunton area.

and then there was 3

Possibly but it may not be that simple as I'm conbobulating a triple gauge holder

Good to know Alex ;-) Do you have to disable the air bags too?

Is this still on? Not many names down :-(

You can strip out the harness, wrap in teatowels and bake in the oven . Guide here: https://my350z.com/forum/body-interior-exterior-and-lighting-diy/375117-diy-painting-06-headlights.html

All I can tell you is I bought one 2nd hand in the UK for £500. The seller told me it cost him a lot more than that to import!

Paid cheers Chris.

I'll go for a smoked set please Chris

1) choptop 2) taybo (Bob)

Found this with a Google search and just ordered a can - cost £21.56! https://www.qpaints.co.uk/sem-aerosol-plastic-leather-prep.html

Ahh, I have some spare neo-chrome ones but won't be long enough for yours

Standard sizes or do you have a plenum spacer?

Just bought the generic DLI model of these and need assistance with wiring. Does anyone either have a 350z specific guide for this or better still the 350z loom? These units are now discontinued but I managed to get a 2nd hand unused one. Any help appreciated

1. Taybo

I'll go for a V3 please Chris

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD 2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine 3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine 4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine 5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine 6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley 7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far 8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine 10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs: 11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine 12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs 13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi... 14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft 15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k 16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley 19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs 20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque 21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft 22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq. 23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar 24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft. 25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft 26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out) 27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft