GMballistic

^^ What they said. As long as you've followed the rules they should appear after the mods have approved them. Usually doesn't take long.

Fingers crossed for you Hooch. I bought mine from Redline Styling ~ obviously cost a little more but they're sitting in my bedroom now waiting to be fitted, look great and if there where any problems I know I'd have had no problems from Steve being that he's a reputable UK seller.

I'm not on Facebook, Instagram or Twitter. Nice cars on the BT news link.

^^ Should of read the rules properly Lyndzzz.

Personally I think your car looked much better with the GTR front ~ in fact your Zed is one of the few that I've seen with the GTR front bumper that can actually pull it off nicely. I'd go back to the GTR bumper if it was me.

^^ F**king hell that is low. Some people are absolute scum and without doubt the world would be a better place without them.

First world problems aye?! I'd take the Zed personally but then I wouldn't have a Fiesta in the first place ~ don't see the point in two cars (unless one is your other halfs).

Different Harry ~ liked it.

Any links, pics or videos?? Haven't heard anything about this.

Actually talking about this earlier with JEMAN. Have a look at this thread, post n#10 - http://www.350z-uk.com/topic/88231-advice-please-guys/

Got that film on DVD ~ have to say I never noticed it. Good spot Scott.

^^ Now that is frustrating ~ especially when more than one person does the same thing.

It is possibly to run without a MAF as I did on my old Impreza but I believe you would need an upgrade ECU to do this which is what I had. I would imagine it's highly unlikely your Zed is MAF-less tbh though. Do you have any pictures? You would have had a MAP sensor then, its not possible to run a modern engine without some kind of air metering ............ Yep you're correct. I can't remember everything I paid for to be put on that darn Impreza. Literally just chucked money at the garage and said make it faster. Not sure it would run correctly at all ~ as docwra mentioned it would need a MAP sensor. Pictures would help.

Your hands will always get filthy when filling up at petrol stations.

It is possibly to run without a MAF as I did on my old Impreza but I believe you would need an upgrade ECU to do this which is what I had. I would imagine it's highly unlikely your Zed is MAF-less tbh though. Do you have any pictures?

Yes it can be slightly annoying and you probably guessed someone would quote you just to be funny so here it is.

That's what put me off that one too. Strangely though it was my Mrs favourite for some reason, ...she even suggested I get a gear knob like that too for some reason.

Yep got that, ..that's why I removed the link as it was for the earlier car sorry. Apparently it just pops off ~ similar to as demonstrated in the first link I posted showing you it being removed on the passenger side. Post n#16 in this thread; http://my350z.com/forum/exterior-and-interior/398376-removing-drivers-door-switch-panel.html

Didn't notice it was just the passenger side. I'd imagine it's not much different though between sides.

Not sure how removing the door card will help him with his question Guy. You can buy the hardtops although I've never seen one here in the UK. Found this US site for you; http://www.smoothlin...nissan_350z.php So yes it is possible JohnPat. Worse paint match ever Rear bumpers no better either.

Go have a rest mate.

Not sure how removing the door card will help him with his question Guy. You can buy the hardtops although I've never seen one here in the UK. Found this US site for you; http://www.smoothline.com/nissan_350z.php So yes it is possible JohnPat.

The MAF sensor is held in by Torq security type screws ~ you will need a Torq set like below to remove it... I cleaned my MAF sensor years ago and I believe I used brake cleaner to do it back then. Sorry it's been a while. You need to be careful though as it's very easy to damage if you're not careful and a fairly expensive part. Found this video from Youtube as a cleaning example. No idea if it will make a difference though to the problem you're having but can't hurt to try it. FYI ~ make sure you disconnect the battery first before you unplug the MAF.

Follow this link; http://my350z.com/forum/audio-video-and-electronics-diy/407151-2008-door-panel-removal-front-speaker-install.html From an American site but should be the same as far as I'm aware.

Your last picture is the inlet throttle body JEMAN. The MAF sensor is in the plastic housing just behind your air filter.