GMballistic

For what they are they look great Ian. Worth every penny by the looks of it.

Can't go wrong with Abbey Motorsport from what I've heard.

^^ Much better Stu. Re: the oil can. Cost's a bit but this is the nicest one I've seen lately. ChrisB just installed one on his supercharger Zed build. Link to catch can just in case you've money burning a hole in your pocket. http://www.mishimoto.co.uk/mishimoto-baffled-oil-catch-can.html

Roll cage, Recaro seats, haltech ECU, KW coilovers, Buddy club decat exhaust, too much camber and NOS. Neil can correct any of that if I am wrong. Fully adjustable suspension arms, Haltech Platinum pro ecu, PU bushes, Nismo injectors, Nismo R Tune intake, Genuine gismo factory fitted kit... hmmm I feel as though I'm still missing something The sort of stuff dreams are made of! Neil can you PM me your build thread so i can have a nose, sounds amazing! Just found it for you. Link: http://www.350z-uk.com/topic/53697-neilp-build-thread-nos-i-need-nos/ Grab a beer first though, ..you may be there a while.

Sound's like a good plan. Doesn't have to be a "specialist" though, just a good independent garage you can actually trust. Honestly some garages will screw people over left right & centre ~ old, young, men, women, straight or gay it doesn't matter to them. If they can, they'll rob you blind. Maybe ask some of the members more local to you to see who they use.

Damn it, I was going to pick up on this You're never going to make Wrong Section Police Captain at this rate mate.

Sorry but wtf!! Should say they did you for £300. Lot's of people just wire brush the rust off and hammerite paint the W-brace but if it's that bad you could have got a second hand one from zmanalex on here or the better option would have been a £129 aftermarket W brace from eBay. Link: http://www.ebay.co.uk/itm/ULTRA-RACING-4-Point-Rear-Lower-Bar-Brace-Nissan-FAIRLADY-Z33-350z-RL4-1259-/271410271144?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f315013a8 Honestly I'm mad for you ~ don't let that garage shaft you for money mate even if you can afford it.

Lol. I'm guessing he didn't as his avatar is a 350 and his signature says 07 GT.

Not sure if this will help but fyi anyway; I'm running 245/35/19 on my fronts which are a 9.5J ET20 and on the rear I'm running 275/35/19 with 10.5J ET20's. If you're not lowered I'm pretty sure the same will work for you although best wait to see if you get a few more suggestions just to be sure. Otherwise maybe try asking CS (Mitz@Cougar Store) as he seems to know his stuff.

You mean by the two hour response time........... That would be a quick response time by some Police Forces. My mates mother was verbally abused & assaulted (hit with her own dog lead that they grabbed off her) by two teenage lads and a girl whilst walking her dog in some local woods, ...called the Police when she got home and the Police turned up the next day! WTF.

No probs ~ there are loads of Nissan clips on eBay so do a search if you want to get them cheaper. At least you can see the correct sizes from the seller I posted. Bought from Byronix loads of times now & always great service.

Admired your Zed many a time, ....that's why you've got my vote Neilp although it was very close between you and Bizz.

Wheel arch/side skirts/engine plastics/bumper/air intake plastic clips: http://www.ebay.co.uk/itm/NISSAN-BUMPER-SPLASHGUARD-INNER-WHEEL-ARCH-LINING-WING-LINER-TRIM-CLIPS-8mm-/190758639913?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3ANissan&hash=item2c6a19d929 Top of bumper/slam panel plastic clips: http://www.ebay.co.uk/itm/NISSAN-BUMPER-UNDERTRAY-SPLASHGUARD-SHIELD-CLIPS-TRIM-FASTENERS-PLASTIC-RIVET-/190869409555?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c70b40f13 They are available at much cheaper prices from Hong Kong etc but these are from a UK seller that I trust & always tend to get my Nissan clips from.

Roll cage, Recaro seats, haltech ECU, KW coilovers, Buddy club decat exhaust, too much camber and NOS. Neil can correct any of that if I am wrong. Fully adjustable suspension arms, Haltech Platinum pro ecu, PU bushes, Nismo injectors, Nismo R Tune intake, Genuine gismo factory fitted kit... hmmm I feel as though I'm still missing something Stubby aerial?!

^^ This, ..and ^^ this. Welcome aboard Gazza.

^^ Either that old boy has a metal bar at the top of his left ear or there is a tear in it as I swear I can see through it. Maybe an old injury from the war?!.

I have heard Subaru's are reliable too but I guess sometimes it's just down to luck or how the car has been looked after previously or who's worked on it or who is doing the work on it. Unfortunately for me the engine builders I chose where not as good as I had been led to believe by members of Scoobynet who had probably only had minor work done on their cars by them as one things for sure they couldn't build a boxer engine to last. Bad luck for my mate too because after they did my engine (well we thought at first) he used them to build his boxer engine on his 98 JDM Type RA with a full Cosworth built engine. Mine lasted 12K miles before it went t*ts up, ....his lasted less than that and after legal threats he was refunded a lot of his money along with his knackered engine which he took to another place to get it sorted. 6 Years later and his Impreza engine running at around 450hp with a Cosworth 2.1 stroker kit is still running great. Just shows they can be reliable when built correctly in the first place. This is who built his engine and I'd highly recommend them to anyone; http://finchmotorsport.co.uk/index.php

She's on "Tinder", 23 years old, has a body like Megan Fox and is located in Cardiff, ...now go. *starts stopwatch*.

From the videos I've heard and some Zeds I've seen if I could do my exhaust again then I'd probably go for the Motordyne Shockwave TDX2. It's another true dual exhaust system and tbh look's very similar in the style of the rear exhaust cans to the Ark Grip. Not cheap though but good things rarely are. Available from Tarmac Sportz; http://www.tarmacsportz.co.uk/GB/TDX2_With_Titanium_Tips/350MDTDX.aspx Link to a video of it on a HR;

Changed my Ipods name to Titanic. It's syncing now.

I know a girl like that in work, ...she make's me wish I was single still. . But she's a he? The Cat is I know, but the girl in work is most definitely not. Oh to be single and free again, ...plus ten years younger, rich and good looking wouldn't hurt.

Lol.

I know a girl like that in work, ...she make's me wish I was single still.

Vote's seem to be getting back to what they where almost.

^^ I know. Would love to see a real cops face though if you got out of your car and said...