Payco

Can't remember.Its a Sparco one so just have a google play..

Thanks The Bodyman,Veilside. Stu, pretty straight forward really.This is the process I used which worked for me as I struggled to find a clear guide to follow. Firstly you need to remove the oem leather cover on your handbrake.I did this by running a scalple down it but decided to use a cutting wheel on my Dremel as it was quicker that way.Once done with a bit of force you can peel the leather off completely. Next step was to prise off the rubber surround at the base of the handbrake.I think it is glued on so start it off with sliding a butter knife under it and then pull it hard to prise it off. Next step is to test fit the new cover.Because of the flared design of the rear of the handbrake its normal to have to cut a 2cm by 1cm opening on the underside rear of your new handbrake cover so it can push back far enough for the button at the front to protrude and function.I did this by wrapping the new handle in a cloth,putting it in a vice and jigging it out with my Dremel. Next job is refitting it and marking through one of the holes in the handbrake handle onto your handbrake to drill a hole to secure the new handle to the brake with the grub screw supplied.Nearly there. Finally.You will need to buy a handbrake gaitor.Got mine for a tenner on eBay.Refit the rubber handbrake base with superglue.Slide the gaitor over the brake.Screw the handle in with grub screw and pull the new gaitor up and over it. Job done.Might not be the best or right way but it worked for me.

Thanks. Enjoyed watching that.

Finished a little mod today I wanted to do before my seats are returned from their retrim with Si. For anyone who has wanted to do this but is a little nervous it really isn't that difficult once you have the courage to cut through and remove your oem leather one. You also need a dremel ideally, Matches nicely with my near gear knob too I think,

Great to see things moving along Andy.Feels like watching them rebuild Steve Austin.Keep up the good work.

on the ramp at RTP so you can see the underneath.

Sooooorrryyyy

ARK THE HERALD ANGELS. It's Christmas. ARK for the win.

Neil, sounds and looks great.

Rims look fine but if I am honest I don't like the colour, think you can do better but not sure which colour. Think you should ask for some photo shop help on here.

Doris. Can highly recommend Ricey at Revolve (above) if you go down the hydro dip route. He dipped most of my bay for me. Photo of the theme and colour I went for on my engine cover below for you to see.

Chance for a mod. Re-spray it in the same colour as your z or something different, Cheap mod.

Welcome to the forum. Great choice.

Trying getting in the car before your Mrs.I find the whining stops if she gets in second !

PS. Whereabouts are you based in West Sussex ?. I am in Wivelsfield Green.

Simples.PM Zmanalex pro trader on here.

Can we not lock this thread and EASTENDERS.

More to the point what on earth are you doing watching that show in the first place ?.

Give them a shout. http://www.philips.co.uk/e/car-lights/home.html

Contact Opie Oils - pro trader on here. He stocks them or did. linky below. http://www.350z-uk.com/topic/82899-osram-and-philips-bulbs-now-available-at-opie-oils/

Muteki for the win.

Strange post but it works.

Nice but its not orange !.

48 this weekend. I drink Shell V Power which is why I only look 30 !.

As Ricey says the final part is a remap to unlock what you have done.