Mark@Abbey m/s

I can say HKS super sound master exhaust/air filter elements and a Uprev remap works real well. We find this will give the car 20bhp and 20lb/ft.and with even give you more fuel econom!. I will sort a price out tomorrow.

Jez, I think it is a Consult job, but you need to make sure you have ther steering wheel in the correct orientation. The wire needs to be centralised. Did you remove the steering column UJ? Very easy to break the wire if the steering wheel has been spun around 1 turn either way. Mark

Dont have a car here with our kit fitted but it isnt hard to make up and fit nicely. Mark

Never seen a gain on the dyno , the airflow is to quick over the throttle body reducing the temperature of the TB will make no difference. Mark sorry to hijack the thread Jez

Has it got a CEL on? if not I would say the cats need to be a little warmer? Can you scan and post up the failure ticket?

No this wont work the car will need holding at 4000rpm prior to doing the test. Even 5 mins turned off will let the cat cool off to much. Mark

Steve, I am with Alex on the mounting it will cause the core to split and leak if you dont suspend it from both ends, also where you have mounted it will cause the car to run hotter coolant temps due to you stopping air flowing through the radiator. We fit the oil cooler up behind the crash bar and make a small deflector to divert the air into the cooler , this stops interfering with airflow to the radiator. Mark

Just make sure the cat are warmed up properly , we have had trouble when MOT testers dont pre-warm the cat properly. As the single cat is further back it does take longer to get up to temperature. Yes we carry Berks de-cats and Motordyne ART de-cats on the shelf. Mark

It that cheap you couldhave it wrapped black.

Just go to RS tuning in Leeds , I have never seen a chip upgrade give anything like the BHP gain quoted on a 350Z, and the last car that we saw that was "chipped" had a SLD fitted to de-limit it..... Mark

We have now found a good rear Banana arm uprated rear bush kit , it is a rose jointed bush that isnt noisy when fitted. We have found these make the cars much more precise when on the brakes real hard and if your a track day warrior the car your find will give better feedback through the steering wheel. We can supply these as a bush kit for you to fit to your own arms £169-32 inc vat + shipping Or we can do you an exchange deal, we carry a set of good straight arms fitted with the new bushes. £241-32 inc vat + shipping but I will need to take a £200-00 deposit until I have checked your arms arent bent or have play in the outer ball joint , I will then refund the deposit. We already have a pair of arms ready to be shipped and carry bush kits ready to be shipped. They go real well with our uprated roll bar links; viewtopic.php?f=114&t=44013&p=648964#p648964

Chilli red is the best.......with a little carbon thou.

Sam, can I have a email address for you, I can mail you some idea's re Uprev-ing your car. Mark

Hi , JDM model car nice, I like the look of the HKS 3037s turbo kit , they have stopped making the kit thou , there is a few kit left in the UK and a few in Japan. good for 500bhp with a few internal mods. Enjoy your car thou. Mark

coolio 1000bhp I feel with the right turbo,s and fuel will be easy, looking forward to seeing the final figures.

what side of the car is the ball joint from? I have some S/H front uprights for sale?

try moving your seat forward a notch or 2. leather seat onto plastic trim type of noise?

Sockets are called Flank drive sockets , It used to be Snap On that only made them but I am now sure a lot of tool makers do the same idea. The work by putting pressure on the centre of the sides of the nut and not on the corners.

Yes still in stock , yes the stock strut brace will still fit without any troubles.

Are your cars both UK? Uk and JDM wiring are dofferent we have found. Post some pictures up please , cant really work out what you are talking about re connectors. To sort these problems we really need a Consult Nissan diagnostic machine thou.

Shows you what people know doesn't it or what they read on car forums!!!!!, stock injecotrs are good for around 350/360bhp.

What your thinking of doing re the stock cats? I think you need to either run race cats in the stock postion or run Motorsdyne ART pipes or Berk decats in the stock postion and a XYZ fitted with race cat. We normally get between 250 and 260 HUB bhp with the mods you have quoted including doing something with the cats. My own UK 2004 350z is running ART de-cats and XYZ with no CAT , No PLENUM spacer stock 04 airbox with HKS filter runs 254bhp at the hub,s with a good UPREV tune. I feel it may give another 5/10bhp with a plenum spacer, drives real nice very strong mid-range. Mark

Yep just the brake light switch, the car is pretty clever it see's an increase in brake pressure but no brake lights so throws a CEL.

UK 370Z and GTR have a system that if the front bumper has a hit under a certain road speed normally by a person, the back of the bonnet is pushed up by hyraulic rams so stopping the person from coming into contact with the hard engine under neath the bonnet and injuring there selves. Removing the bumper or bonnet will put the warning light on , normally a main dealer trip to turnt he light back off.

Nissan main dealer diagnostic machine.