Jump to content

BulletMagnet

Members
  • Posts

    10,335
  • Joined

  • Last visited

Everything posted by BulletMagnet

  1. Varis did do their front lip in both FRP and CF, so it could be a genuine one
  2. Since when did chocolate melt on impact rather than with heat? :lol: Pothole from hell....filled with lava...maybe...?
  3. Would you rather I said that you don't do things nice?
  4. For someone having the "Do it nice or do it twice" as a sig, you sure do a lot of stuff twice.....
  5. Did the exhaust parts come labelled as to where they go? I remember my Invidia had all the sections labelled "Driver Side" and "Passenger Side", which had to be swapped around as their cars are left had drive and ours are right hand drive. Just wondering if it was the same case with MotorDyne.
  6. The mouth is black again Glad to see its back and beyond it's former glory. I hope this is the benchmark from now on
  7. Don't you start with that nonsense.....
  8. Or PEBCAK Problem Exists Between Chair And Keyboard
  9. actually, I think my offsets are front to back, lol
  10. Glad it wasnt succesful in the escape and end up in the girlfriends leg or something
  11. Rear 19" x 10.5J offset +28 Front 19" x 9.5J offset +23
  12. I'd say the conrod snapped and proceeded to attempt an escape from the block
  13. I'm sure you were meant to write those grit grades in reverse
  14. I think I remember reading that Nissan changed to suspension for the european market to take into account the roads of a more winding variety
  15. BulletMagnet

    Bump Steer

    Tyre pressures at 35psi all round?
  16. BulletMagnet

    Bump Steer

    I too run the same sizes as above with no issues. Possibly suspension related?
  17. Nice one Rich, coming along nicely
  18. Speak to Tarmac, many options to suit whatever volume level you seek
  19. Check for the "clicky axle", a district metallic sound when initially reversing or slowly setting off. If exhaust is OEM, check the flange where mid pipe meets backbox to see if it's corroded through or about to.
  20. You could still get a mishimoto, only difference is that you'd be filling it with PS fluid instead, lol
  21. When you say "Anyway I had a pair of speakers kicking around that a customer didn't want", does that mean you have a car audio shop? If so are there any discounts for members?
  22. I pulled new speaker wire from my aftermarket HU to the speakers and put spade connectors on the wire. I also believe that the OEM speakers are 0.5 Ohm whereas your replacements are 4 Ohm, so I'm not sure whether the Bose amp will play well with those.
×
×
  • Create New...