Jump to content

Car in the garage after one day of ownership


Juggalo

Recommended Posts

Was bringing the car home and noticed a whine in first gear. All other gears were fine. I didn't really notice it on the test drive.

Concerned, I took it to a gearbox specialist yesterday who said the bearings are shot, and needs stripping. Advising that if driven, the bearing will eventually shatter and destroy the box.

Going to costs a fair whack.

Luckily the dealer I bought it off has been completely brilliant about it, and seems more eager to keep me happy than keeping his profit intact. To be fair, he's probably going to lose his profit on this problem.

Was contemplating rejecting the car, but it's an absolute minter aside from that problem.

Link to comment
Share on other sites

Not a great start but sounds like the dealer is doing the right thing, who is it?

 

Name put me off, but he seems to sell very well cared for cars. I think this one got in under his radar.

Anyway, we'll see how it's handled and I'll update as and when. Will be Monday now before the Specialist has ascertained the damage.

 

http://www.tradecars4u.co.uk/

Link to comment
Share on other sites

I agree not a great name but if they sort your car out and see you right then that's the main thing. Its refreshing to hear about a dealer that seems to care, so many stories on here of those that don't!

Link to comment
Share on other sites

Hi bud,

 

We're in Chester too (well sandycroft but I come from Chester). Feel free to pop in for a coffee sometime

 

Which gearbox specialist has it gone into? If I was you I'd have the DMF and clutch checked whilst your there as if they're worn but not goosed (let's say they've got another 10k in them even) it could be a good time to shell out yourself on a new one because the box is getting dropped anyway and it's a swine of an expensive job to do......you might only end up paying for the parts rather than the labour.

  • Like 1
Link to comment
Share on other sites

Hope all goes well. If the dealer does the right thing, I will have to keep a note of them when I decide to replace my Z, after my engine blows up on track.

 

Me too when I come to change it. Good aftermarket dealers are rarer than hens teeth.

  • Like 1
Link to comment
Share on other sites

Hi bud,

 

We're in Chester too (well sandycroft but I come from Chester). Feel free to pop in for a coffee sometime

 

Which gearbox specialist has it gone into? If I was you I'd have the DMF and clutch checked whilst your there as if they're worn but not goosed (let's say they've got another 10k in them even) it could be a good time to shell out yourself on a new one because the box is getting dropped anyway and it's a swine of an expensive job to do......you might only end up paying for the parts rather than the labour.

 

Thanks bud :)

The Gearbox Centre in Buckley. Heard they're very good.

Do they do single flywheel kits for the Zed?

Unfortunately the car has reamed me financially this month, so I'm just going to have to let the dealer sort this one, otherwise I'd definitely have a new clutch at the least.

I think the last time I had a DMF done ran me for £550. Wish I'd done it myself, it's not that difficult, just time consuming and awkward if you haven't got ramps or a pit.

Edited by Juggalo
Link to comment
Share on other sites

Hi bud,

 

We're in Chester too (well sandycroft but I come from Chester). Feel free to pop in for a coffee sometime

 

Which gearbox specialist has it gone into? If I was you I'd have the DMF and clutch checked whilst your there as if they're worn but not goosed (let's say they've got another 10k in them even) it could be a good time to shell out yourself on a new one because the box is getting dropped anyway and it's a swine of an expensive job to do......you might only end up paying for the parts rather than the labour.

 

Thanks bud :)

The Gearbox Centre in Buckley. Heard they're very good.

Do they do single flywheel kits for the Zed?

Unfortunately the car has reamed me financially this month, so I'm just going to have to let the dealer sort this one, otherwise I'd definitely have a new clutch at the least.

I think the last time I had a DMF done ran me for £550. Wish I'd done it myself, it's not that difficult, just time consuming and awkward if you haven't got ramps or a pit.

 

Lol my mates car has just come out of there having at a recon box fitted due to something letting go and punching a hole in the gearbox.

 

He's just had about a grand of work done by us as well.....poor lad.

 

DMF and clutch will run you anywhere from £750 to over a grand depending on where you go.

 

They do a solid for the zed I do believe

Link to comment
Share on other sites

Hi bud,

 

We're in Chester too (well sandycroft but I come from Chester). Feel free to pop in for a coffee sometime

 

Which gearbox specialist has it gone into? If I was you I'd have the DMF and clutch checked whilst your there as if they're worn but not goosed (let's say they've got another 10k in them even) it could be a good time to shell out yourself on a new one because the box is getting dropped anyway and it's a swine of an expensive job to do......you might only end up paying for the parts rather than the labour.

 

Thanks bud :)

The Gearbox Centre in Buckley. Heard they're very good.

Do they do single flywheel kits for the Zed?

Unfortunately the car has reamed me financially this month, so I'm just going to have to let the dealer sort this one, otherwise I'd definitely have a new clutch at the least.

I think the last time I had a DMF done ran me for £550. Wish I'd done it myself, it's not that difficult, just time consuming and awkward if you haven't got ramps or a pit.

 

Lol my mates car has just come out of there having at a recon box fitted due to something letting go and punching a hole in the gearbox.

 

He's just had about a grand of work done by us as well.....poor lad.

 

DMF and clutch will run you anywhere from £750 to over a grand depending on where you go.

 

They do a solid for the zed I do believe

 

 

 

Then I'll almost certainly be getting a single as my first mod on the car and doing it in the summer. I hate DMF's with a passion, absolutely useless things.

I did ask the guy at TGC if he had any recon 350 gearboxes.

"nah mate, it's not a ford escort" haha :D

Link to comment
Share on other sites

Just a wee update:

 

No news over the weekend, obviously. Called yesterday and could't get any solid information from the Gearbox woman. Same deal today.

Spoke to the dealer. He's been liaising with the mechanic since Friday. The gearbox is beyond economical repair which really surprised me, it didn;t sound quite that bad. Anyway, he's been trying to source a recon unit. Hard to find apparently.

Z33 box 321/A03 that has the clutch arm on the outside, and the cylinder bolted on top. So if you guys know a reputable source?

I'm still quietly shocked that I'm not getting an argument/attitude over it. they're supposed to kick you to the kerb when they've got your money! :headhurt:

Link to comment
Share on other sites

But any reputable gear box guys can strip the gearing and replace parts. Why would they condem the whole box??

 

it happens unfortunately if the box isn't that common prices for individual parts can cost a fortune .if it were a vectra or a mondeo the gearbox guy would hand you one off his shelf .

Link to comment
Share on other sites

Theres a few breaking on ebay as we speak.

 

I'll take a look. Prefer recon really, I know it's right then

 

But any reputable gear box guys can strip the gearing and replace parts. Why would they condem the whole box??

 

No idea, I know very little about gearboxes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...