Briggsybriggs1 Posted July 22, 2014 Posted July 22, 2014 A quick question after fitting the new catch and closing the bonnet should you be Abel to press on the bonnet and it have spring in it ? Sent from my iPhone using Tapatalk Quote
Briggsybriggs1 Posted July 22, 2014 Posted July 22, 2014 Yes.thanks :-) Sent from my iPhone using Tapatalk Quote
14N Posted July 22, 2014 Posted July 22, 2014 A quick question after fitting the new catch and closing the bonnet should you be Abel to press on the bonnet and it have spring in it ? You can adjust the position of the bonnet catch by raising or lowering it slightly. Just slacken off the 3 bolts and move it up or down (depending on what your desired position of the bonnet is once closed). Remember to nip the bolts back up before you close the bonnet. Quote
HoundDog Posted July 23, 2014 Posted July 23, 2014 Fitted mine today thanks a lot mark a bit more bling. Quote
RichCox350Z Posted August 4, 2014 Posted August 4, 2014 Where we down to on the list then Mark? Quote
Mopedmark Posted August 4, 2014 Author Posted August 4, 2014 Hi guys had the vapour blaster go down with a seal problem, sent to Germany for a new part waited 2 weeks and Yes they have sent the wrong bloody one. Sorry about this Zedders but I will get them out ASAP I may be another couple of weeks but I am working on it sorry for the delay Quote
Mopedmark Posted August 21, 2014 Author Posted August 21, 2014 Going to be back up and running very soon guys bear with me thanks Quote
Mopedmark Posted September 15, 2014 Author Posted September 15, 2014 Yeah blaster back up and running will have 3 ready to out on Wednesday guys Quote
Mopedmark Posted September 16, 2014 Author Posted September 16, 2014 Hi everyone blinged bonnet catches up and running again Quote
cs2000 Posted October 3, 2014 Posted October 3, 2014 Arrived during the week and fitted today. Simple job, just need a size 12 spanner/socket for the old bolts and a size 13 for the new ones and a pair of needle nose pliers for releasing the bonnet latch wire. Looks fantastic Quote
JoKeR Posted October 8, 2014 Posted October 8, 2014 Arrived during the week and fitted today. Simple job, just need a size 12 spanner/socket for the old bolts and a size 13 for the new ones and a pair of needle nose pliers for releasing the bonnet latch wire. Looks fantastic Hello mate, did u have to remove the bumper to get to it? Cheers That's what she 'Zed' :-/ Quote
Tinyflier Posted October 8, 2014 Posted October 8, 2014 Arrived during the week and fitted today. Simple job, just need a size 12 spanner/socket for the old bolts and a size 13 for the new ones and a pair of needle nose pliers for releasing the bonnet latch wire. Looks fantastic Hello mate, did u have to remove the bumper to get to it? Cheers That's what she 'Zed' :-/ No, you can access the catch from the top down through the slam panel. Took me about 15 min to replace mine (including the time to remove and refit my CF cooling panel). David Quote
JoKeR Posted October 8, 2014 Posted October 8, 2014 Sweet cheers mate I think this will go on my list then. Thanks That's what she 'Zed' :-/ Quote
jimboy2 Posted October 10, 2014 Posted October 10, 2014 Hi mark. I have pm'd you. I'm ready to buy now. Let me know payment details Quote
-350-Ed- Posted October 16, 2014 Posted October 16, 2014 Is this still going? I'd love one and am ready to pay whenever. Ed Quote
GMballistic Posted October 16, 2014 Posted October 16, 2014 Is this still going? I'd love one and am ready to pay whenever. Ed Ed if you hover your cursor arrow over Mopedmark's name you will see more info pop up including the "send message" tab. Click on that and send him a PM to get the best response. These look fantastic so can't blame you for wanting one. Quote
Mopedmark Posted October 16, 2014 Author Posted October 16, 2014 Hi guys I am in the process of doing some more hopefully be ready very soon thanks for your patience Quote
RichCox350Z Posted October 27, 2014 Posted October 27, 2014 How far down the list are we now then Mark? Quote
Mopedmark Posted November 13, 2014 Author Posted November 13, 2014 Right then Zedders I am going to start a new list as these are now available every week again 1: Quote
Ricey Posted November 29, 2014 Posted November 29, 2014 35 quid! That's epic value for a really unique bit of bling! Sorry Mark I've never actually read this thread - well impressed. 1 Quote
Mopedmark Posted March 14, 2015 Author Posted March 14, 2015 It's that time year Zedders when the engine bay needs more bling these are now in stock again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.