Ken Posted March 5, 2011 Share Posted March 5, 2011 Rain today cut short the meet, but Cookbot had the time to fit the relays for the retractable wing mirrors. good job mate Quote Link to comment Share on other sites More sharing options...
Craigb Posted March 5, 2011 Share Posted March 5, 2011 Could you fit them cookbot at a push? Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 5, 2011 Author Share Posted March 5, 2011 I have no problems fitting them and can even do it at a meet if the weather was better than today's! Cookie Quote Link to comment Share on other sites More sharing options...
jim Posted March 6, 2011 Share Posted March 6, 2011 Yea, soon as they're made, I'll email you. This is until I get near the bottom of the list, then I might need payment first, to ensure they're actually needed. Craig, they're not too bad to fit. I'm going to revamp the guide I've started with more pictures. I comes down to splicing 3 wires, cutting 2 to make 4 ends, then connecting those ends up. Where do you place the actual circuit board? Quote Link to comment Share on other sites More sharing options...
rothers2901 Posted March 6, 2011 Share Posted March 6, 2011 The circuit board is stuck to the piece of insulating foam within the door handle itself. Nice and neat Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 6, 2011 Author Share Posted March 6, 2011 Right then, I lied like cheap watch when I said I'll have 15 done this weekend! I've managed 5, but got most of the soldering done on the remaining 10 so will have them done by Wed night at the latest. I can confirm that fitting is easier on the pre 06 cars too as the wire colours match the wires on my unit. Cookie Quote Link to comment Share on other sites More sharing options...
Craigb Posted March 7, 2011 Share Posted March 7, 2011 So can I put my name down for one of these please cookbot, how would you like payment? Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 7, 2011 Author Share Posted March 7, 2011 You're on the list on page 1 Quote Link to comment Share on other sites More sharing options...
Craigb Posted March 7, 2011 Share Posted March 7, 2011 Ah okay, your not far down the m1, just past sheffield, but im sure i will be making some meets soon Quote Link to comment Share on other sites More sharing options...
350 Russ Posted March 7, 2011 Share Posted March 7, 2011 can you put me down for one aswell please. Quote Link to comment Share on other sites More sharing options...
chrisgunton Posted March 7, 2011 Share Posted March 7, 2011 What number on the list are you up to now matey? Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 8, 2011 Author Share Posted March 8, 2011 I've made another 4 today and have a total of 10 on the side here, but they use slightly different switches to the first batch, so want to fit one my self to see if it works well. I'm doing this Saturday so will contact you in list order later that night if all goes well. Cookie Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted March 8, 2011 Share Posted March 8, 2011 Hi Cookbot, Although I've put myself down for your kit long time ago, I can't see myself on your list on the front page. My original post was here: viewtopic.php?f=9&t=46121&p=683203#p683203 on 27th of February. Can you please acknowledge and add myself to the list. Also, how can I pay? Cheers! I've made another 4 today and have a total of 10 on the side here, but they use slightly different switches to the first batch, so want to fit one my self to see if it works well. I'm doing this Saturday so will contact you in list order later that night if all goes well. Cookie Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 8, 2011 Author Share Posted March 8, 2011 Hi Cookbot, Although I've put myself down for your kit long time ago, I can't see myself on your list on the front page. My original post was here: viewtopic.php?f=9&t=46121&p=683203#p683203 on 27th of February. Can you please acknowledge and add myself to the list. Also, how can I pay? Cheers! I've made another 4 today and have a total of 10 on the side here, but they use slightly different switches to the first batch, so want to fit one my self to see if it works well. I'm doing this Saturday so will contact you in list order later that night if all goes well. Cookie Added and should be a couple of weeks. Cookie Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted March 8, 2011 Share Posted March 8, 2011 What number am I now? In 33a? I can see myself in between 33 and 34. Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 9, 2011 Author Share Posted March 9, 2011 What number am I now? In 33a? I can see myself in between 33 and 34. Haha, I'm not too bad at electronics, but I'm a bit computer special! Quote Link to comment Share on other sites More sharing options...
Peter10 Posted March 9, 2011 Share Posted March 9, 2011 Got mine today Cookbot. I will probably wait until Sunday or Monday to give it a go so I can use the updated guide you are working on . Quote Link to comment Share on other sites More sharing options...
HaydnH Posted March 9, 2011 Share Posted March 9, 2011 Hi Cookbot, I appear to be the opposite of Octet, I am on the list but never said I wanted 1... I think you confused this post as a sign of interest looking at the people before and after me on the list: http://www.350z-uk.com/forum/viewtopic. ... 40#p682340 Haydn. Quote Link to comment Share on other sites More sharing options...
popeacute Posted March 10, 2011 Share Posted March 10, 2011 cookbot, stick me down for one as well please!, thanks jp Quote Link to comment Share on other sites More sharing options...
Cookbot Posted March 10, 2011 Author Share Posted March 10, 2011 cookbot, stick me down for one as well please!, thanks jp Done, thanks. To all those who are waiting, my apologies if I'm a little late at replying emails etc. I have just found out I've been made redundant and have quite a bit to sort over the next few days On the plus side I've ordered enough parts to do another 10 units today and there's 10 on the side here. Counting down the list should give you an idea of how long it'll take. Thanks all, Cookie Quote Link to comment Share on other sites More sharing options...
M9O OEY Posted March 10, 2011 Share Posted March 10, 2011 Really gutted to hear bout your redundancy hope you find work quickly , Quote Link to comment Share on other sites More sharing options...
popeacute Posted March 10, 2011 Share Posted March 10, 2011 cheers for adding me, sorry to hear about the bad luck!, good luck sorting stuff out... Quote Link to comment Share on other sites More sharing options...
chrisgunton Posted March 11, 2011 Share Posted March 11, 2011 bad news Good luck with the job hunt. Hope you are making a small profit off these kits Quote Link to comment Share on other sites More sharing options...
Simon+Kat Posted March 11, 2011 Share Posted March 11, 2011 Sorry to hear that Cookie, I know its corny but as they say 'as one door closes another opens' and it's amazing how often i've seen this come true. Quote Link to comment Share on other sites More sharing options...
flyboy Posted March 12, 2011 Share Posted March 12, 2011 With the initiative you have shown with this project I'm sure you will be snapped up by someone soon. Good luck with finding something you will enjoy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.