Husky Posted November 27, 2009 Author Posted November 27, 2009 OK figured it out and boy to i feel like an absolute tool so im just a mere noob when it comes to the engine mechanical stuff so learning the hard way. (think ill stick to electrical stuff next time ) so anyway, there are six black plastic spacers (you know where this is going already ) yeah well with no instructions they seemed to fit nicely to space the engine cover up so it wasnt at a funny angle blah blah. yes i did think it was odd there was nothing bridging the middle of the plenum. and no i didnt over torque anything, but it didnt matter as i could never get them up to torque and seal it as it just bent and then cracked. The most frustrating thing is i normally research everthing anally till im totally happy, i just didnt see it as something complicated car 1, me 0 call it a learning experience i suppose Quote
Husky Posted November 27, 2009 Author Posted November 27, 2009 At least it's sorted, brother. no its not, my plenum is cracked Quote
Danny 350Z Posted November 27, 2009 Posted November 27, 2009 At least it's sorted, brother. no its not, my plenum is cracked I thought you fixed it, John! Quote
Husky Posted November 27, 2009 Author Posted November 27, 2009 At least it's sorted, brother. no its not, my plenum is cracked I thought you fixed it, John! i may have figured it out but im not f**king magneto yes i know its alu Quote
scottsoulby Posted November 27, 2009 Posted November 27, 2009 now then, just replied in the other thread, ill send my home done polished one Quote
andlid Posted November 27, 2009 Posted November 27, 2009 You tool ;-) any way to just repair the crack? Got a spair plenum here and spacer but guess I'm a bit to far away Quote
Husky Posted November 27, 2009 Author Posted November 27, 2009 You tool ;-) any way to just repair the crack? Got a spair plenum here and spacer but guess I'm a bit to far away its cast aluminium so not a chance. everybodys gotta learn somehow Quote
Wez21 Posted November 28, 2009 Posted November 28, 2009 Hi there, can you not get it aluminium welded as a temporary measure? Im sure some engineering companies will do it for you for a small fee? Hope you get some luck with it!! Quote
Danny 350Z Posted November 28, 2009 Posted November 28, 2009 Hi there, can you not get it aluminium welded as a temporary measure? Im sure some engineering companies will do it for you for a small fee? Hope you get some luck with it!! He's managed to bluff a replacement off some poor soul. His weird dog money is no good, I tell ya Quote
givememorepower Posted November 28, 2009 Posted November 28, 2009 Magneto indeed You can't but experience, and it's the most expensive tool of the trade. Let me know if it adds any 'depth' or volume to the note your engine makes under acceleration. Quote
rtbiscuit Posted November 28, 2009 Posted November 28, 2009 temporary weld would be something like liquid steel. Quote
Husky Posted November 28, 2009 Author Posted November 28, 2009 nurrish loaned me his, KUDOS TO THAT MAN Bennet picked it up and helped me fit it properly ,much kudos to that man grant played liason to CS and helped me get a new one sorted , kudos again scott is sorting me out the new one, ill pm you in a bit mate! i know im never going to live it down, but a huge thankyou! and these kind of times are why this club is bloody brilliant !! THANKS GUYS!! :D Quote
nixy Posted November 28, 2009 Posted November 28, 2009 Well said - and like others have said, its a learning curve. I admire people that have a go themselves, how else will you learn? Quote
nixy Posted November 28, 2009 Posted November 28, 2009 i bet he'll be better than anyone else at them now! Quote
Husky Posted November 28, 2009 Author Posted November 28, 2009 i bet he'll be better than anyone else at them now! ive done it enough now Quote
GT4 Zed Posted November 28, 2009 Posted November 28, 2009 Hey pup, the end result is all that matters and the zed is purring as it should nice little drive out to CS today and will be even more fun next time when you get real tyres on your baby i am keeping them in warmers so they will be up to temp when you get them on Quote
Husky Posted November 28, 2009 Author Posted November 28, 2009 Hey pup, the end result is all that matters and the zed is purring as it should nice little drive out to CS today and will be even more fun next time when you get real tyres on your baby i am keeping them in warmers so they will be up to temp when you get them on formula one style i like it thanks for the compliments earlier aswell. Quote
Gilly199 Posted November 28, 2009 Posted November 28, 2009 so. . . em . . . whats the chances of a DIY write up then Quote
BladesGrant Posted November 29, 2009 Posted November 29, 2009 Glad you got it all sorted mate. Give me a shout when you have the plenum if you want, always like having a tinker myself and I have swapped mine and fitted a spacer, I am not saying I won't break it though!!! Quote
Husky Posted November 29, 2009 Author Posted November 29, 2009 Glad you got it all sorted mate. Give me a shout when you have the plenum if you want, always like having a tinker myself and I have swapped mine and fitted a spacer, I am not saying I won't break it though!!! great! will do Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.