ZMANALEX

Unfortunately you have got to buy the complete mirror Hannah. Fortunately I have a few preowned mirrors in stock. If I can help further then just and let me know what colour you require. Alex.

A cable tie is your friend.

I have two sets of preowned DC sports stainless headers in stock. I also have an unbranded set believed to be HKS. Drop me a pm if I can help you further. Alex.

PM received and replied to Plenty in stock Alex.

Jez, when disconnecting the SC UJ you really should lock the steering column from turning and as Mark has said you may have damaged the wiring on the angle sensor. Why don't you centralise the wire and get the wheel into the correct orientation and take it from there however Consult 2 may have to be your friend. Alex.

This is the fix. viewtopic.php?f=157&t=43456 viewtopic.php?f=157&t=43455 All in stock and good to go same/next day.

Providing the garage has swopped over the panel on the inside if the old wing which acts as an insulator between the wing and the door hinge area then you should not experience any axtra wind noise. If they have failed to swop this panel over then you will most definately experience extra wind noise. Alex.

Very difficult to tell from the pictures, however a word to the wise: If you have simply just "hung" your cooler from the top set of fixing points then unfortunately these will soon break off due to vibrations etc. You really do have to reinforce this install by connecting the top and lower fixing points of the cooler by suitable threaded rod and tubing. This is no criticism of your install but simply a point being made to avoid you any issues in the future. Alex.

What one header Quote "a header" There again, a header set. Any way, if that is what the OP requires then I have aftermarket header sets in stainless or plenty stock cast ones. And a by the by "Where are my bolts" Steady Zeddy?????????????????????

I will have all the above. Do you want to remain stock size for the pulley set? You will also require a belt kit which I have in stock sizes or any over or under sizes are available next day. What exactly do you mean by "header"? I am sure that I will have it in stock, but just calling it by a different name. Alex.

I have a silver one with a Greddy lip professionally fitted. I also have a stock one in Azure, If you want pictures then just let me know. Ready to be shipped same/next day Alex

Has Craig not got the old style that hardly works

If you don't find a used one then I have plenty in stock Mike.

OK, Michael as you now know, fitting of a replacement flywheel wronly appears to be an occuring issue with some garages. This should not really happen as firstly, most replacement flys do come with illustrated fitment instructions and common sense must prevail. With the Fidanza Fly you do have to be careful as there are two options for fitment. One is clearly marked FRONT for Maxima & Altima. The other is clearly marked REAR for 350Z, G35 & G37. On other applications available purely for RWD such as 350Z, G35 & C37 there is only one fitment application, so wrong fitment becomes almost impossible. This is the application that was sent to your garage and how they managed to fook up is totally beyond me. There is a male pin on the crank which slots into the female hole on the fly. simples. This has all to do with the CPS (crank position sensor) picking up the correct signal from the fly. It is so important that these types of cars are only worked on by specialists, however it is to your garage's credit that they have held there hands up and admitted the error of there ways. I have lost count of the number of garages (including Nissan Main Dealers) who have phoned me after fitting one of my fly/clutch kits with the usual: "I wonder if you can help me, but I have just fitted one of your clutch/fly kits and the car is not running right." The best advice that I can give you, in this instance Michael is to wait until you get the car back from them and judge then on the end product. If there are still issues then send in the cavalry. There is also now the added complication of the DE fly being different from the HR fly. I know of a well respected trader on this forum who ordered from me a HR fly and fitted it to a DE motor, of course the car would not start and they phoned me with there concerns and after a short conversation I was able to offer the solution. Moral of the story is that we all can make mistakes as every day is a school day Alex,

Next day mate

All your pm's replied to Michael, so you now know the fix and what it will cost. As said previously this is a common issue and no blame should be made on the garage. Alex.

Welcome to the forum Paul There are a lot of Scottish members on the forum mate, there is a thread on here somewhere listing most of us. There are a few in Dundee, I am in Perth and there are lots of members in Aberdeenshire, Fife and Strathclyde way. You are not alone. Alex. edit:here it is viewtopic.php?f=84&t=31687&start=120

Low mileage pre-owned cats in stock. Just if I can help you further.

Here you go mate viewtopic.php?f=157&t=42009 viewtopic.php?f=157&t=42011 In stock and good to go same/next day. Just if I can help you further.

This must be the Daddy of all resurrections.

Yes they are the correct part but they are aftermarket and extremely poor quality. I have seen these in person as the seller's premises are not to far from me. They are made in China if I remember correctly. If they were of decent quality then I would be stocking these and have them listed in my sub forum/Z store. Fit them at your peril

I thought that I had already answered that question in reply to the pm that you sent me

Circa 2.5mm

PM received and replied. Parts in stock, good to go same/next day.