Jump to content

ZMANALEX

Members
  • Posts

    15,056
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. Gates upgraded belts are in stock and good to go same/next day They are very easy to swop out, 10 mins to get the undertray off and back on again and 10 mins to swop out the belts. You will not do any damage running with squealing belts, however best to change the belts asap. Drop me a PM if I can help you further mate In stock and good to go same/nex day Alex
  2. Never known a temp switch to fail. Plenty in stock if you wish to try one Alex
  3. Thanks for the referrals guys However I have already priced this up for the OP and he has went all quiet Alex
  4. Providing the front chassis legs are not twisted then it should not be to serious a fix. New crash cans are £75.00 each and new carbon composite front panels are £150.00. Best to get a comprehensive list of all parts required and price up to establish how economical a repair it will actually be. To keep costs down most parts will be available preowned. Alex
  5. It is located in the cam cover on the top of the engine and is easily reached and is a DIY and will only take a few minutes. New and preowned PCVs in stock if required Alex
  6. ZMANALEX

    Retaining clip

    There will be air in the system and will just require a "proper" bleed. Remember that you will also have to bed them in. Alex
  7. Sounds like it could well be fan motor failure. In stock and good to go same/next day if required viewtopic.php?f=157&t=48509 Alex
  8. Eibachs Eibach spacers in stock for the 370 and good to go same/next day Drop me a pm if I can help you further. Alex.
  9. As all the above: Take a week of work and enjoy. You are passing my door on the A9 just North of Perth, be sure to drop in Alex
  10. As what chettle says
  11. Process of elimination if an informed diagnoses is not to hand. (1) Take car for short spin with rear sway bar drop links disconnected and tied up out the way. (2) Check for brake pad movement within rear calipers (3) Greaze splines within rear hub assembly. (4) Greaze and rotate 180 degrees outer axle slide, remembering to clean up the faces. (5) Replace rear outer axle slide. Edit (6) Door stops. Alex
  12. Good luck with this Barry, I am sure that the lads at Nobles will try and push this through for you. Alex
  13. If your clutch is slipping which it certainly appears to be by your description, and you are not inducing slip or abusing it, then clutch replacement is the only answer. In stock and good to go same/next day if required at £285.00 Flywheels also in stock at £345.00 Just drop me a PM if I can help you further Alex
  14. That is because I do not have one in stock at the moment However they are available next day
  15. If some one else is paying, then new bumper Alex
  16. New Slave cyl + braided clutch line + new high temperature clutch fluid will fix your issue All parts in stock and good to go same/next day Drop me a PM if I can help you further Alex.
  17. Don't feel bad Adrian, I had a similar issue yesterday with my Roadster. The roof would not open, not even a purr or a click. After 10 minutes serious head scratching I noticed that the passenger seat was missing. Stuck the seat back in, hooked up the wiring and guess what, full roof operation back to normal. Alex
  18. How does £100.00 + shipping sound? Alex
  19. Preowned all in stock and good to go same/next day Alex
  20. I fookin' knew you'd say that I suppose I'm that much in credit with you that it wouldn't cost that much Oh! fooking hell...........Your Decals.......... Shipping tomorrow mate
  21. DBA rotors and a decent set of pads, lines and fluids and you will be sorted mate And guess what: In stock and good to go same/next day Alex
  22. Thanks for the referrals guys All parts in stock to sort this issue Annie You know the drill Alex
  23. No harm in getting the camber checked Have a quick look for excessive tyre wear Alex
  24. I think that you will find that most the guys on this forum have to much respect for there cars to be getting up to these launching antics. Alex
  25. Not a good idea to launch the Zed and dumping will soon give you costly remedial work. In answer to your question, the clutch bleed screw is located on the bottom of the concentric slave tube Alex
×
×
  • Create New...