ZMANALEX

Thanks for the referrals guys All parts in stock to sort this issue Annie You know the drill Alex

No harm in getting the camber checked Have a quick look for excessive tyre wear Alex

I think that you will find that most the guys on this forum have to much respect for there cars to be getting up to these launching antics. Alex

Not a good idea to launch the Zed and dumping will soon give you costly remedial work. In answer to your question, the clutch bleed screw is located on the bottom of the concentric slave tube Alex

Reallly? That's news to me. What's the difference Alex? I believe that the wheel centres are a different size News to me as I was under the impression all were made in Japan and I've never seen this mentioned anywhere! Every day is a school day mate I keep both sizes of centre caps in stock for both variants.

Reallly? That's news to me. What's the difference Alex? I believe that the wheel centres are a different size

How do you know that your wheel stickers are genuine? Best to send me over a picture Alex I know the guy i brought the car off. The wheels were from Nissan about 3Ks worth at the time !! Still best with a picture if you want me to match the stickers There are Jap LMGT4 rims and American LMGT4 rims.

How do you know that your wheel stickers are genuine? Best to send me over a picture Alex

If you mean the centres for the Nismo LMGT4 rims then I have them in stock. There are 2 sizes and they are £100.00 per set + shipping. Let me know if I can help you further Alex Wow !!! £100 !!! Best getting saving my pennies. Can you get the Nismo wheel stickers too? Mine are starting to peel off :-( Nismo wheel decals also in stock

If you mean the centres for the Nismo LMGT4 rims then I have them in stock. There are 2 sizes and they are £100.00 per set + shipping. Let me know if I can help you further Alex

Top the brake master cyl. reservoir up to the MAX mark. Alex

I have already offered you one mate and Lee has also offerred you one Alex

Clutch kits and flywheels in stock and good to go same/next day Unfortunately I am fresh out of VQ35DE gearboxes at the moment. Drop me a PM if I can help you further. Alex

I have plenty Jonathan, however it will be Monday before I can ship. Alex

Hi Kev, Drop Links: Compression rod bushes: Compression rod ball joints: Hub carrier lower ball joints: These are the 4 most common, in particular the compression rod bushes and ball joints. All in stock and good to go same/next day if required mate:thumbs: Alex.

If it is not something silly, and you have done the resets, and it is not something that has previously been suggested then I think that you may have a faulty throttle position sensor which is integral to the TB. I would suggest that you get the resets done on Consult 3 from a friendly Nissan or indy garage and get them to check out the TB. If it is the TPS in the TB then I have plenty preowned in stock if required. Alex.

Lock the gear shift rod with a pair of molegrips preferably from underneath the car and simply unscrew the shift knob anti clock wise. It will be tight so you may require a strong man with a good grip. Alex

Very straight forward Maf and housing are in same place as OEM with JWT PC Alex

I also have these viewtopic.php?f=157&t=43466 Alex

I have the same problem. Whaddya mean "fit a new one"? A whole. new. windscreen?! Isn't that going to be expensive?? A new top moulding, as they are not reusable and should be replaced every time you fit a new screen or if they pop out. Alex

New Genuine Nissan mats in stock: £65.00 New and preowned discs in stock. Preowned Coupe and Roadster OEM springs in stock Drop me a PM if I can help you further Alex.

Best to fit a new one Alex

Got to be these viewtopic.php?f=157&t=58518 Alex

Andy, You can replace the lines in any sequence that you want mate, however try not to let the master cyl. run dry or you may create an air lock which may prove difficult to remove. The bleed sequence is: N/S/R - O/S/F - O/S/R - N/S/F And remember and do all 8 nipples Alex

Pm on its way