ZMANALEX

No drama mate, probably just a sway bar drop link and can wait until you get back. In stock and good to go same next day so give me a shout on your return if I can help you further. Alex

These schematics should help, however at the end of the day it will more than likely be the fan motors that have failed. Any further questions, then just drop me a PM mate Alex.

Best just to replace both belts and get it done with mate, they are not expensive Alex

Kev, If the compression rod bush has failed then it would be obvious to the traned eye mate. Other areas are compression rod ball joint, suspension upright lower ball joint, sway bar drop links. etc.etc.etc. I have all the above in stock and good to go same/next day if required. Drop me a PM if I can help you further mate Alex

Gates upgraded belts are in stock and good to go same/next day They are very easy to swop out, 10 mins to get the undertray off and back on again and 10 mins to swop out the belts. You will not do any damage running with squealing belts, however best to change the belts asap. Drop me a PM if I can help you further mate In stock and good to go same/nex day Alex

Never known a temp switch to fail. Plenty in stock if you wish to try one Alex

Thanks for the referrals guys However I have already priced this up for the OP and he has went all quiet Alex

Providing the front chassis legs are not twisted then it should not be to serious a fix. New crash cans are £75.00 each and new carbon composite front panels are £150.00. Best to get a comprehensive list of all parts required and price up to establish how economical a repair it will actually be. To keep costs down most parts will be available preowned. Alex

It is located in the cam cover on the top of the engine and is easily reached and is a DIY and will only take a few minutes. New and preowned PCVs in stock if required Alex

There will be air in the system and will just require a "proper" bleed. Remember that you will also have to bed them in. Alex

Sounds like it could well be fan motor failure. In stock and good to go same/next day if required viewtopic.php?f=157&t=48509 Alex

Eibachs Eibach spacers in stock for the 370 and good to go same/next day Drop me a pm if I can help you further. Alex.

As all the above: Take a week of work and enjoy. You are passing my door on the A9 just North of Perth, be sure to drop in Alex

As what chettle says

Process of elimination if an informed diagnoses is not to hand. (1) Take car for short spin with rear sway bar drop links disconnected and tied up out the way. (2) Check for brake pad movement within rear calipers (3) Greaze splines within rear hub assembly. (4) Greaze and rotate 180 degrees outer axle slide, remembering to clean up the faces. (5) Replace rear outer axle slide. Edit (6) Door stops. Alex

Good luck with this Barry, I am sure that the lads at Nobles will try and push this through for you. Alex

If your clutch is slipping which it certainly appears to be by your description, and you are not inducing slip or abusing it, then clutch replacement is the only answer. In stock and good to go same/next day if required at £285.00 Flywheels also in stock at £345.00 Just drop me a PM if I can help you further Alex

That is because I do not have one in stock at the moment However they are available next day

If some one else is paying, then new bumper Alex

New Slave cyl + braided clutch line + new high temperature clutch fluid will fix your issue All parts in stock and good to go same/next day Drop me a PM if I can help you further Alex.

Don't feel bad Adrian, I had a similar issue yesterday with my Roadster. The roof would not open, not even a purr or a click. After 10 minutes serious head scratching I noticed that the passenger seat was missing. Stuck the seat back in, hooked up the wiring and guess what, full roof operation back to normal. Alex

How does £100.00 + shipping sound? Alex

Preowned all in stock and good to go same/next day Alex

I fookin' knew you'd say that I suppose I'm that much in credit with you that it wouldn't cost that much Oh! fooking hell...........Your Decals.......... Shipping tomorrow mate

DBA rotors and a decent set of pads, lines and fluids and you will be sorted mate And guess what: In stock and good to go same/next day Alex