ZMANALEX

Thanks for the referral Stew Calvin, preowned pumps in stock: Alex

PM received and replied to

I stock Hel and HKS both in carbon black. I also have Goodridge 4 and 6 line type for 350/370 and R35 GTR. Alex.

Pat, If the garage uses the 2 x P clips that comes with the kit then the front lines will be secure Edit: I am assuming that the HEL lines do come with 2 x P clips. Alex

If the front camber is within OEM tollerances then it will be fine

I think that they may have meant camber and not caster. Why not post up the print out for us to see. If your car is not lowered then it is strange that you are having a geometry issue and further investigation may be required. Alex

The guy that is selling these is actually dismantling a 370 Alex

Indeed, the Brembo lines are different from the JDM lines. I have both Hel and Goodridge in stock and good to go same/next day Alex

The fan motors will take maximum of 1 hour to swop out. You only have to replace the motors as your existing fans can be reused. It is a very easy straight forward job Alex

New fan motors in stock and good to go same/next day viewtopic.php?f=157&t=48509 Alex

IMHO the car is beyond economical repair whether the OP or a body shop is carrying out the repairs. The chassis leg if repaired would be a botch, so it much be replaced for a safe, professional repair to be carried out. Alex

Jay, I have a preowned Nismo and a preowned JWT in stock Give me a shout if you want to go down that route mate Alex

Beware of buying a car displaying an EML, but it may be something very straight forward, however best to plug in a code reader to determine what the issue actually is before you buy the car. Alex

Didn't you read my post from Sunday? Alex

Thanks foor the heads up Neil Leosille, the 350Z VQ35DE Engine has a maintenance free drive chain. The only belts are these ones, which are on the front of the engine: viewtopic.php?f=157&t=31548 As Neil has mentioned, I carry in stock all the proper service items and lots more. Have a look in here: viewforum.php?f=157 All in stock and good to go same/next day Just drop me a PM if I can help you further or if you have any further questions Alex

I have the Air Con modules in stock PM me over the part number from your old unit and I will run a compatibility check for you. Alex

Compression Rod ball joint or bushes, Sway bar drop links and bushes, Lower hub carrier ball joint are all prone to cause front suspension knocking: Greaze and rotate for the clicky axle issue for a temporary fix or fit new for permanent fix. Clean out your washer lines and the non return valve to help your washer issue or replace the valve and pumps: All the above in stock if required, and good to go same, next day. Alex

In stock and good to go same/next day

Try the resets, they are in the guide's section.

Brembo calipers will clear the 17" OEM Nissan wheels. Alex.

Fuse Link @ + Battery terminal You are engaging the clutch, yeah!

Beat you to it

Here you go mate: viewtopic.php?f=157&t=55106 viewtopic.php?f=157&t=55107 viewtopic.php?f=157&t=27438 Any of these will serve you well In stock and good to go same/next day Alex

You will not go to far wrong with this Exactly what you are looking for viewtopic.php?f=56&t=60222&start=0 Alex

In stock and good to go same/next day Alex