ZMANALEX
-
Posts
14,825 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
Wrong part number for the OPs 2003 model.
-
Choice of Exedy Clutch kits and single and dual mass flys in stock and good to go same/next day: Drop me a PM if I can help you further Alex
-
It is a DIY if you are handy with the spanners. Fluid change may help, however a braided line and slave cyl. swop out would also be beneficial. All parts in stock as required and good to go same/next day Drop me a PM if I can help you further. Alex
-
Fitting a new rocker cover gasket will not have any effect on the oil ingress to the spark plug tubes Alex
-
As said previously new cam covers are required to fix this issue if the oil is leaking into the spark plug tube. viewtopic.php?f=157&t=57126 viewtopic.php?f=157&t=48364 Cam covers and gaskets in stock and good to go same/next day Huge saving over Nissan main dealer prices. Alex
-
Daryl, Best to keep adjusting them until you find the sweet spot that suits your style of driving mate. Alex
-
DMF
-
Open the bonnet and have a look.
-
Follow the wires from the fan motors and you will soon find them Alex
-
no there is a BCM also under there. The BCM is attached to the fuse box in the R/H footwell. Alex
-
I posted up the install instructions for the V1 previously but I can't remember where. Have a search and you should find it but it was a while back. Alex
-
Switches in stock if required Alex.
-
I think that the OP may be looking for a more permanent fix
-
Probably lazy fan motors, but certainly should be sorted before you have an over temperature issue. Alex
-
The car will over heat eventually if the fan motors do not kick in when stationary, so I think that you are not giving it enough time Providing you keep an eye on your expansion bottle and you do not allow it to seriously "boil over" then you will not do any harm. Fan motors here if you require them viewtopic.php?f=157&t=48509 Alex
-
In here viewforum.php?f=157 Alex
-
Nismo style N1 in stock Choice of ready to paint or Carbon Alex
-
Must be something odd with your pulleys or pulley sizes. Are you sure that the tensioner adjusting bolts are sitting correctly in there bridles?
-
Perhaps you are running smaller pulleys as the 948/1173 should fit your application:thumbs: If you are running smaller pulleys then shorter belts will fix your issue Alex
-
I have both arms in stock either new or preowned and good to go same/next day Drop me a PM if I can help you further mate Alex
-
Nice one Gary Preowned in stock Genuine Nissan new, next day Drop me a PM if I can help you further. Alex.
-
I have the Viking Air Con Cleaner in stock and good to go same/next day. Very easy to use and it works and smells good Just sit it on the front floor, pull the trigger and close the door. Alex
-
Just take a 12v feed and earth to the motors. If they do not spin up properly then replacement is the only permanent fix. In stock and good to go same/next day: viewtopic.php?f=157&t=48509 Alex.
-
You are guessing again Get a proper professional diagnoses Alex